«Payment by installments» of monobank
payments
of $1.67
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Exhaust filter (HEPA 12) for Samsung vacuum cleaners (DJ97-00788B, DJ63-00433A)
The original exhaust filter (HEPA H12) is designed for Samsung vacuum cleaners. This filter provides a high level of filtration, effectively trapping allergenic particles and dust, ensuring clean air in your home. It is compatible with Samsung vacuum models such as DJ97-00788B and DJ63-00433A.
Specifications
| Parameter | Value |
|---|---|
| Seat length | 135 mm |
| Total length | 144 mm |
| Seat width | 87 mm |
| Total width | 94 mm |
| Seat depth | 12 mm |
| Total thickness | 20 mm |
Compatibility with models
The filter is compatible with the following Samsung vacuum models:
- Samsung VCA-VH51
- Samsung VCC5128V3G/SBW
- Samsung VCC5138H3D/XEV
- Samsung VCC5138H3R/SBW
- Samsung VCC5138X3D/XEV
- Samsung VCC5148V33/SBW
- Samsung VCC5150H3B/XEV
- Samsung VCC5150H3O/SBW
- Samsung VCC5150X3B/XEV
- Samsung VCC5151H32/XEV
- Samsung VCC5155H3R/XEV
- Samsung VCC5155X3R/XEV
- Samsung VCC5158H3R/SBW
- Samsung VCC5345V3B/SBW
- Samsung VCC5345V3S/SBW
- Samsung VCC5345V3S/XEV
- Samsung VCC5354H3N/SBW
- Samsung VCC5355H3B/SBW
- Samsung VCC5355H3B/XEV
- Samsung VCC5356H3N/SBW
- Samsung VCC5356H3N/XEV
- Samsung VCC5357H31/XEV
- Samsung VCC5357H3W/SBW
- Samsung VCC5357H3W/XEV
- Samsung VCC5377H33/XEV
- Samsung VCC5480V3B/XEO
How to choose the right filter
When selecting an exhaust filter, pay attention to the following parameters:
- Vacuum model: ensure that the filter is compatible with your device.
- Filter dimensions: check the dimensions (length, width, depth) for a precise fit.
- Filter type: choose original or certified replacements to ensure necessary filtration.
Reasons for filter failure and prevention methods
Exhaust filters can fail for the following reasons:
- Clogging: frequent use of the vacuum without replacing the filter can lead to contamination.
- Wear: over time, filters lose their effectiveness.
To prevent premature wear, it is recommended to:
- Regularly check and replace the filter as needed.
- Use the vacuum according to the instructions, avoiding excessive strain.
Difficulty of filter replacement
Replacing the exhaust filter in a vacuum cleaner is a relatively simple procedure and can be done independently. The approximate steps are as follows:
- Turn off the vacuum cleaner and unplug it from the power source.
- Open the filter compartment cover.
- Remove the old filter by gently pulling it out of the compartment.
- Install the new filter, ensuring it is securely in place.
- Close the compartment cover and turn on the vacuum cleaner.
The difficulty of replacement is low, and even a beginner can handle it.
