Water unit bushing for Bosch, Junkers water heaters
Part number: 8705500106
Compatibility: Bosch, Junkers WR10-P, 2P, WR11
Specifications:
- Type: bushing
- Height: 19.6 mm
- Groove diameter: 14.4 mm
- Toothed flange size: Ø22.5 mm, thickness 2 mm
- Seal diameter: 17.6 mm
- Material: brass alloy
- Rod hole: Ø2 mm
- Manufacturer: China
Application:
The water unit bushing is designed to regulate flow and maintain water pressure in water heaters. It prevents water leakage, ensuring stable operation of the heating system and the longevity of its components.
Features:
This part is made of corrosion-resistant brass that withstands high temperatures, ensuring a long service life. The bushing facilitates the proper movement of components, such as the rod or piston, within the water unit, preventing wear and damage.
Advantages:
- Reliability and durability
- Resistance to high temperatures and corrosion
- Easy installation
- Compatibility with popular Bosch and Junkers water heater models
Installation recommendations:
The water unit bushing is easy to install in the water unit block. Regular inspection and timely replacement are recommended to prevent breakdowns and maintain stable operation of the heater.
How to choose the right bushing:
When selecting a water unit bushing, ensure you check the following parameters:
- Compatibility: Make sure the bushing is suitable for your Bosch or Junkers water heater model.
- Dimensions: Check the height and diameter to avoid installation errors.
- Material: Choose parts made from corrosion-resistant materials, such as brass.
Reasons for bushing failure:
The bushing may fail for the following reasons:
- Wear due to prolonged use.
- Corrosion from using poor-quality water.
- Pressure fluctuations that can damage the structure.
To prevent failure, monitor water quality and regularly check the condition of the water heater.
Replacement recommendations:
- Disconnect the water heater from the power and water supply.
- Remove the cover of the water unit block.
- Remove the old bushing by carefully pulling it out.
- Install the new bushing, ensuring correct orientation.
- Reassemble everything, close the cover, and reconnect the water heater.
Replacement difficulty rating: Moderate. A basic tool kit and some experience with household appliances are required for the replacement.
