«Payment by installments» of monobank
payments
of $5.67
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Convection heater for oven EGO
The convection heater for the oven has a diameter of 191/178 mm and a power of 2400 W, designed for Bosch and Siemens models. This element ensures even distribution of hot air, improving the quality of baking and cooking. With this heater, you can restore the functionality of your oven and continue using it to prepare your favorite dishes.
Technical specifications
| Specification | Value |
|---|---|
| Models | 00483636, 00499003 (EGO) |
| Power | 2400 W |
| Outer diameter | 191 mm (±3 mm) |
| Inner diameter | 178 mm (±3 mm) |
| Connection | 2 terminals 6.3 mm (double) |
Compatible models
This heater is compatible with many Bosch and Siemens oven models, including but not limited to the following:
- Bosch HBN3200GB/01
- Siemens HB27024GB/01
- Bosch HBN3250GB/01
- Siemens HB90520GB/01
- ...and many more.
Before purchasing, ensure that your oven's model number matches the listed ones to avoid selection errors.
How to choose the right product
When selecting a heater, pay attention to the following parameters:
- Power: Ensure that the heater's power matches the original element.
- Diameter: Check the outer and inner diameter to avoid mismatches.
- Terminals: Ensure that the number and type of terminals match your device.
Causes of failures and prevention methods
The main causes of heater failure include:
- Overheating caused by improper use or a faulty thermostat.
- Mechanical damage during installation or operation.
- Corrosion from moisture or contaminants.
To prevent premature wear, follow these recommendations:
- Regularly clean the oven of grease and food residues.
- Do not overload the oven while cooking.
- Check the operation of the thermostat and other devices for stable heating.
Difficulty of replacement
Replacing the heater is a moderately difficult task. You will need the following tools:
- Screwdriver
- Pliers
- Electrical tape (if necessary)
Follow these steps for replacement:
- Disconnect the oven from the power supply.
- Remove the back panel of the oven to access the heaters.
- Disconnect the old heater, remembering the order of the wire connections.
- Install the new heater, connecting the wires in the same order.
- Close the back panel and reconnect the oven to the power supply.
- Check the functionality of the new heater.
By following the instructions, the heater replacement is quick and safe.
