Heating element for oven 230×325 mm Sanal, 650 W, Asel (new model)

General description:

The heating element (tubular electric heater) for Sanal ovens of the new model is designed for efficient heating of air inside ovens and electric stoves. With a power of 650 W and dimensions of 230×325 mm, this heating element ensures even cooking, making it ideal for both home and professional kitchens. It is made from durable materials that withstand high temperatures, ensuring long-lasting and reliable operation.

Main specifications:

• Type: Heating element for electric stoves
• Power: 650 W
• Voltage and frequency: ~220 V/50-60 Hz
• Connection: 2 terminals 6.3 mm
• Distance between terminals: 17 mm
• Length of heating element (from mounting bracket): 325 mm (±10 mm)
• Width of heating element: 230 mm (±10 mm)
• Diameter of heating tube: 6.5 mm
• Size of mounting bracket (flange): 70×22 mm (±5 mm)
• Mounting: 2 holes Ø 4.5 mm (center-to-center distance 56 mm)
• Features: Top/bottom heating
• Manufacturer: Turkey

Compatibility:

The heating element is compatible with various models of ovens and electric cabinets, providing versatility and ease of installation. Before purchasing, check the specifications of your model to ensure compatibility with this heating element.

How to choose the right product:

When selecting a heating element, pay attention to the following parameters:

• Dimensions of the heating element: ensure that the length and width match your device.
• Power: choose a power rating that corresponds to your oven's specifications.
• Type of connection: verify that the terminals match your model.
• Check compatibility: it is advisable to cross-reference the information with the device documentation or consult with the seller.

Causes of potential malfunctions and prevention methods:

The heating element may fail for several reasons:

• Burnt-out coil: can be caused by overheating or exceeding the allowable load.
• Mechanical damage: avoid impacts and falls on the heating element.
• Insulation failure: regular checks of the wire condition can help prevent short circuits.

To prevent wear of the heating element, follow the operating recommendations and avoid overheating the device.

Difficulty of replacement:

Replacing the heating element has moderate difficulty and can be done independently with basic knowledge of electrical engineering. Follow these steps:

1. Disconnect the oven from the power supply for safety.
2. Remove the back panel if necessary.
3. Disconnect the old heating element by unscrewing the mounting hardware.
4. Install the new heating element in place and secure it.
5. Connect the wires to the terminals and check the reliability of the connection.
6. Reassemble the oven and reconnect it to the power supply.

Before starting, check the operation of the new heating element to ensure it is functioning correctly.