Ignition cable for Electrolux stove (3570571400)
Description: The ignition cable is designed to ensure reliable and safe ignition of gas stoves. This component is compatible with a variety of models from AEG, Electrolux, Rex-Electrolux, and Zanussi, making it a versatile choice for your appliance. Installing a new cable will help restore the functionality of your stove and enhance its safety.
Technical specifications:
| Name | Value |
| Part number | 3570571400 |
| Type | Ignition cable |
| Material | Insulated wires |
| Length | Standard, suitable for most models |
Compatibility:
The ignition cable is compatible with various stove models, including:
- AEG: HG654550SM, HG644350SM, HG654320NM, and others.
- Electrolux: PX640OV, EGG6242NOK, EGH96343BR, and others.
- Rex-Electrolux: PN640V, PR640RUOV, and others.
- Zanussi: ZGO68434BA, ZGG62424XA, ZGG966424M, and others.
For accurate part selection, please check your stove model before purchasing.
How to choose the right part:
When selecting an ignition cable, pay attention to the following points:
- Your stove model — ensure that the cable is compatible with your appliance.
- Part number — it should match the original number of your spare part.
- Length and material of the cable — they must meet the requirements of your stove.
Possible causes of failure:
The ignition cable may fail for the following reasons:
- Wear of wire insulation.
- Mechanical damage (e.g., bending or breakage).
- Contact with moisture or other chemicals.
To prevent damage, avoid excessive tension on the cable and protect it from moisture.
Replacement recommendations:
Replacing the ignition cable can be done by yourself if you have basic appliance repair skills. Follow these steps:
- Disconnect the stove from the power supply and turn off the gas.
- Remove the stove cover to access the cable.
- Disconnect the old cable from the corresponding connectors.
- Install the new cable, ensuring it is securely attached.
- Reconnect the stove and check the ignition functionality.
Replacement difficulty:
The difficulty of replacing the ignition cable can be rated as low. With the necessary tools and by following the instructions, most users can perform this procedure themselves.
Remember, choosing and installing the right parts is key to the safe and long-lasting operation of your appliances!
