«Payment by installments» of monobank
payments
of $24.00
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Motor (engine) 1200W H=176 mm for washing vacuum cleaner Ametek (6110930141) Makita (11ME06)
The 1200W motor, with a height of 176 mm, is designed for washing vacuum cleaners such as Ametek and Makita. This two-stage bypass motor with a peripheral design ensures high performance and reliability. It is versatile and compatible with various models, making it an excellent choice for vacuum cleaner repair and maintenance.
Technical specifications
| Parameter | Value |
|---|---|
| Power | 1200 W |
| Height | 176 mm |
| Impeller diameter | 144/148 mm |
| Impeller height | 69 mm |
| Turbine hole diameter | 44 mm |
| Top diameter | 79 mm |
| Distance between screw holes | 84 mm |
Compatibility
This motor is compatible with the following models:
- Makita 445x
- Kress NTX1200EA
How to choose the right product
Before purchasing, ensure that the specifications of the new motor match those of your old one. Pay attention to:
- Power (1200 W)
- Height (176 mm)
- Impeller and hole diameters
- Distance between mounting holes
Compare these parameters with the original part to avoid mistakes when selecting a replacement part.
Possible causes of failure and prevention methods
The main reasons for motor failure may include:
- Overheating due to prolonged operation without breaks.
- Clogged filters leading to overload.
- Electrical connection issues.
To prevent wear, it is recommended to:
- Regularly clean filters and containers from dust.
- Avoid overloading the device and monitor operating modes.
- Check electrical wiring for damage.
Difficulty of part replacement
Replacing the motor is a task of moderate difficulty. You will need:
- Screwdriver for unscrewing screws.
- Pliers for disconnecting wires.
Replacement steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the cover and unscrew the old motor.
- Disconnect the wires from the old motor.
- Install the new motor and connect the wires.
- Secure the motor with screws and replace the cover.
Overall, replacing the motor may take between 30 to 60 minutes depending on the experience and preparation of the technician.
