|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Jet (nozzle) for Greta gas stove for natural gas (M6*0.75)
The jet (nozzle) for the Greta gas stove is designed to ensure stable and efficient combustion of natural gas. This component is essential for regulating the gas supply to the burners of gas stoves, ensuring optimal operation of the device. The fitting has an M6*0.75 thread and is suitable for use in various models of stoves that operate on natural gas.
Technical specifications
| Parameter | Value |
|---|---|
| Purpose | For gas stoves |
| Type | Nozzles |
| Gas type | Natural (main) |
| Nozzle height | 8.5 mm |
| Thread connection | M6x0.75 |
| Height of threaded part | 5.5 mm |
| Hex size | 7 mm |
| Material | Brass alloy |
| Country of manufacture | China |
Compatibility
- Nord
- Drushkovka
- Greta
- Greta
How to choose the right jet
When selecting a jet for a gas stove, pay attention to the following parameters:
- Gas type: Ensure that the jet is suitable for natural gas.
- Thread connection: Check that the thread matches M6*0.75.
- Size: Ensure the correct height and diameter to avoid installation issues.
Possible causes of malfunction and prevention methods
Malfunctions of the jet can be caused by:
- Clogging: Accumulation of dirt and grease can lead to reduced efficiency. Regularly clean the jet from contaminants.
- Corrosion: Brass alloy is prone to corrosion, especially in high humidity conditions. Store the stove in a dry place.
Difficulty of replacing the jet
Replacing the jet is a relatively simple procedure that can be done by yourself:
- Disconnect the stove from the gas source.
- Remove the old jet using the appropriate tool (7 mm hex key).
- Clean the installation area from dirt and gas residues.
- Install the new jet, ensuring proper threading and tightness of the connection.
- Check for gas leaks after installation.
The difficulty of replacement can be rated as low, making this process accessible for most users.