|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Body cover latch for Zelmer vacuum cleaner (794971)
The body cover latch is an essential component for Zelmer vacuum cleaners, designed to securely close and protect the internal parts of the device. This element ensures the airtightness of the body, which contributes to the optimal operation of the vacuum cleaner and prevents air leakage. Replacing the latch is necessary if the original part is broken or lost, as this can lead to reduced vacuum cleaner performance.
Technical specifications and compatibility
| Model | Part number |
|---|---|
| ZVC412KTRU(01)(1600.3HT) | 794971 |
| ZVC412KQUA(01)(1600.3HQ) | 794971 |
| ZVC412STUA(01)(1600.0ST) | 794971 |
| ZVC412SP(01)(ZVC412SP) | 794971 |
| ZVC412HQ(1600.0HQ) | 794971 |
| ZVC412KQ(1600.3HQ) | 794971 |
| ZVC412KTRU(1600.3HT) | 794971 |
| ZVC412KT(01)(1600.3HT) | 794971 |
| ZVC411STRU(1600.0ST) | 794971 |
| ZVC412ST(1600.0K04ST) | 794971 |
| ZVC412SPRU(1600.0SP) | 794971 |
| ZVC412HQUA(01)(1600.0HQ) | 794971 |
| ZVC412KQ(01)(1600.3HQ) | 794971 |
| ZVC411STRU(01)(1600.0ST) | 794971 |
| ZVC412KTUA(01)(1600.3HT) | 794971 |
| ZVC412KQUA(1600.3HQ) | 794971 |
| ZVC412STRU(1600.0ST) | 794971 |
| ZVC412KTUA(1600.3HT) | 794971 |
| ZVC412SP(1600.0SP) | 794971 |
| ZVC412KQRU(01)(1600.3HQ) | 794971 |
| ZVC412HQ(01)(1600.0HQ) | 794971 |
| ZVC412ST(01)(1600.0ST) | 794971 |
| ZVC412STUA(1600.0ST) | 794971 |
| ZVC412KQRU(1600.3HQ) | 794971 |
| ZVC412KT(1600.3HT) | 794971 |
| ZVC412STRU(01)(1600.0ST) | 794971 |
| ZVC412SPRU(01)(1600.0SP) | 794971 |
| ZVC412HQUA(1600.0HQ) | 794971 |
How to choose the right part
When selecting a body cover latch for your Zelmer vacuum cleaner, pay attention to the following points:
- Check the model of your vacuum cleaner and ensure it is compatible with the models listed in the table.
- Note the part number (794971) to avoid errors during purchase.
- Ensure that the part shows no visible damage or wear.
Possible causes of failure and prevention methods
Common causes of body cover latch failure may include:
- Mechanical damage caused by careless handling.
- Material wear from prolonged use.
- Improper installation or removal of the body cover.
To prevent wear, it is recommended to:
- Handle the vacuum cleaner carefully and avoid sharp impacts.
- Regularly check the condition of the latch and replace it if necessary.
Difficulty of part replacement
Replacing the body cover latch is a relatively simple procedure that can be done independently. It is recommended to follow this step-by-step process:
- Turn off the vacuum cleaner and unplug it from the power source.
- Remove the old latch by gently pressing the clips.
- Install the new latch in its place, ensuring it is securely fastened.
- Check that the body cover closes tightly and without gaps.
The difficulty level of the replacement can be rated as low, and even a beginner can handle this task without special tools.