|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Samsung hose latch (DJ64-00185A)
The Samsung hose latch (DJ64-00185A) is an original part for Samsung vacuum cleaners, ensuring a secure connection between the hose and the device. It is essential for maintaining the vacuum cleaner's efficient operation, preventing air leaks, and providing stable suction power. Made in Korea, this latch guarantees high quality and durability.
Specifications and compatibility
| Model | Compatibility |
|---|---|
| Samsung VC21F60JUDB/EV | Yes |
| Samsung VC21F60WNAR/EV | Yes |
| Samsung VC21F60YKGC/EV | Yes |
| Samsung VCC6240V3B/XEV | Yes |
| Samsung VCC6260V3R/XEV | Yes |
| Samsung VCC6340H3A/XEV | Yes |
| Samsung VCC6360H3K/XEV | Yes |
| Samsung VCC6367H3K/XEV | Yes |
| Samsung VCC9211V1B/XAZ | Yes |
| Samsung VCC9271E3R/SBW | Yes |
| Samsung VCC9273E3W/SBW | Yes |
| Samsung VCD9420S31/XEV | Yes |
| Samsung VCD9420S32/XEV | Yes |
| Samsung VCD9422S33/XEV | Yes |
| Samsung VCD9450S3B/XEV | Yes |
| Samsung VCD9451S3B/XEV | Yes |
| Samsung VCD9452S3B/XEV | Yes |
| Samsung VCD9480H3B/XTR | Yes |
| Samsung VCD9480H3W/XEV | Yes |
| Samsung VCD9481H3W/XEV | Yes |
How to choose the right product
When selecting a hose latch, it is important to ensure compatibility with your Samsung vacuum cleaner model. Check your device's model number and match it with the list above. It is also recommended to inspect the condition of the old latch: if it is cracked or does not secure properly, it needs to be replaced.
Possible causes of malfunction and prevention methods
Malfunctions of the latch can occur due to:
- Mechanical damage (impacts, drops).
- Wear from frequent use.
- Accumulation of dirt or dust, which can hinder proper securing.
To prevent wear, monitor the condition of the latch and clean it from dust and dirt. Regular checks can help identify issues early and avoid more serious breakdowns.
Difficulty of part replacement
Replacing the Samsung hose latch (DJ64-00185A) is a relatively simple task that can be done independently. You will need to follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the damaged latch from the hose.
- Install the new latch in place of the old one, ensuring it is secured.
- Test the vacuum cleaner to ensure the part is installed correctly.
The difficulty level of the replacement can be rated as low, and anyone can handle this task, even without specialized experience.