|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Aquafilter insert for XT Thomas vacuum cleaners (198754)
The aquafilter insert is designed for use in XT Thomas vacuum cleaners, providing effective operation in washing mode. It serves as a reservoir for dirty water collected during wet cleaning, rather than just a filter. Before starting cleaning, ensure that the aqua box is empty.
Specifications and compatibility
| Article number | 198754 |
|---|---|
| Used in | Aqua-Box (article numbers 118074, 118114, 118115) |
| Compatible vacuum models | 788572 THOMAS PARKETT PRESTIGE XT 788570 THOMAS PARKETT MASTER XT 788574 THOMAS PARKETT STYLE XT 788577 THOMAS MULTI CLEAN X10 PARQUET 788523 THOMAS NERO AQUASTEALTH 788563 THOMAS PET&FAMILY 788562 THOMAS Multi Clean X7 AQUA+ 788566 THOMAS CAT & DOG XT 788597 THOMAS Pet & Family PLUS 788568 THOMAS Pet & Family 788585 THOMAS ALLERGY & FAMILY 788567 THOMAS LORELEA XT 788586 THOMAS WAVE XT AQUA-BOX 788561 THOMAS VESTFALIA XT 788565 THOMAS TWIN XT 788592 THOMAS MOKKO XT 788591 THOMAS SKY XT |
How to choose the right product
When selecting the aquafilter insert, ensure that article number 198754 matches your vacuum cleaner. Check compatibility with the model listed above. Also, make sure that the aqua box where the insert will be installed corresponds to article numbers 118074, 118114, or 118115.
Possible causes of malfunction and prevention methods
Common causes of aquafilter failure may include:
- Incorrect use: Ensure that the aqua box is always empty before cleaning.
- Clogging: Regularly clean the filters and check the condition of the aqua box.
- Overfilling: Avoid overfilling the aqua box to prevent spillage.
To prevent wear, it is recommended to regularly check the condition of the insert and replace it if any damage or contamination is found.
Difficulty of part replacement
Replacing the aquafilter insert is a simple procedure that can be done by yourself. Follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the aqua box from the vacuum cleaner.
- Take out the old aquafilter insert.
- Install the new insert onto the suction filter (article number 198745).
- Ensure that the insert is securely attached.
- Reattach the aqua box to the vacuum cleaner.
Overall, the process takes no more than 10 minutes and does not require special tools.