|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Reflector for BЦН pump, d=157 mm
The reflector for the BЦН pump is a key component that ensures the efficient operation of pumping systems. It is made from high-quality stainless steel, guaranteeing durability and resistance to corrosion. This universal reflector is suitable for various pump models and is an excellent choice for professional repair technicians and DIY enthusiasts looking to perform quality repairs on their devices.
Specifications
| Parameter | Value |
|---|---|
| Compatibility | Universal |
| Purpose | For pumps |
| Type | Spare parts |
| Overall diameter | 157 mm |
| Impeller seat diameter | 131 mm |
| Installation diameter for sealing ring | 150 mm |
| Installation diameter in pump housing | 133 mm |
| Diameter of the hole for the corresponding seal part | 26 mm |
| Diameter of the reflector installation hole | 15.5 mm |
| Overall height | 27 mm |
| Metal sheet thickness | 1 mm |
| Material | Stainless steel |
| Quantity per item | 1 |
| Country of manufacture | Ukraine |
Compatibility
The reflector is designed for wide application in various pumps. Before purchasing, ensure that the dimensions of your current reflector match the specifications listed above.
How to choose the right spare part
When selecting a reflector for your pump, pay attention to the following aspects:
- Dimensions: Ensure that the diameter and height of the reflector meet your requirements.
- Material: Choose parts made of stainless steel to avoid corrosion and extend service life.
- Compatibility: Make sure the reflector is compatible with your pump. Check the specifications and dimensions of the old reflector.
Causes of failure and prevention methods
Several factors can lead to reflector failure:
- Wear: Over time, the material may lose its strength.
- Corrosion: If the reflector is not made from quality material, it may be susceptible to corrosion.
- Improper installation: If the reflector is installed incorrectly, it may become damaged.
To avoid failure, follow installation recommendations and replace worn parts in a timely manner.
Replacement recommendations
- Disconnect the pump from the power supply and drain any remaining liquid.
- Remove the old reflector by carefully extracting it from the pump housing.
- Clean the installation area from dirt and remnants of the old seal.
- Install the new reflector, ensuring it is securely fixed in the correct position.
- Check all connections and start the pump for testing.
Replacement difficulty
Replacing the reflector is a task of medium difficulty. If you have basic skills in working with pumps and tools, you can perform this procedure yourself. Otherwise, it is recommended to consult a professional.