|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Bowl lid seal for Kenwood kitchen machine (KW712198)
Bowl lid seal is an essential component necessary for ensuring the airtightness and efficient operation of the Kenwood kitchen machine. The diameter of the seal is 125 mm, making it compatible with many models. The seal prevents ingredient leakage during operation and ensures stable performance of the machine.
Specifications and compatibility
| Parameter | Value |
|---|---|
| Diameter | 125 mm |
| Compatibility with models | KM006, KM002, KM080, KM506, KM331, KMM760, KMM770, KM631, KM630, KM400, KMC500, KM840, KMM710, KM316, KM023, KM020, KMC577, PB500, KM615, KM810, KM416, A996A, KM417, KMC015, KM220, KM070, KM635, KM610, KM502, KM210, KM084, KM083, KM003, KM082, A900MAJOR, KM816, KMC550, KM340, KMM705, KM089, KMC030, KM646, KM315, KM021, KM005, KM330, KM636, KMM750, PB501, PM500, KM250, KM335, KM336, KMM777, KM800, A900CHEF, KMC570, KM600, KM460, KM030, KM410, KMC505, KM013, KM230, KM300, KM201, KM200, KM346, KM500, KM640, AT339, KM001, KM086, KM007, KMM700, KM310, KMC510, KM040, KM010, KM290, KMM025, KMC560, KM011, KM440 |
How to choose the right seal
When selecting a seal, it is important to consider the following points:
- Ensure that the diameter of the seal is 125 mm.
- Check compatibility with your Kenwood kitchen machine model, according to the list above.
- Pay attention to the material of the seal; it should be high-quality and durable.
Causes of failure and prevention methods
The seal may fail for the following reasons:
- Material wear due to frequent use.
- Damage from improper handling.
- Incorrect installation or absence of the seal.
To prevent wear, it is recommended to:
- Regularly check the condition of the seal and replace it at the first signs of damage.
- Follow the operating instructions for the kitchen machine.
- Clean the seal from food residues after use.
Difficulty of seal replacement
Replacing the bowl lid seal is a fairly simple procedure that can be done independently. Here is a step-by-step guide:
- Disconnect the kitchen machine from the power supply.
- Remove the bowl lid.
- Take out the old seal by carefully pulling it from the groove.
- Clean the installation area from dirt.
- Install the new seal, ensuring it is properly secured in the groove.
- Reassemble the machine and check its functionality.
The difficulty of replacement is low. The procedure takes only 10-15 minutes.