|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Door seal for Ariston, Indesit oven C00274015
The door seal for Ariston and Indesit ovens (C00274015) is an essential component designed to seal the oven door. It prevents heat leakage and ensures even cooking, enhancing the appliance's efficiency. The dimensions of the seal are 370 mm in height and 410 mm in width, and it is made of heat-resistant rubber, ensuring durability and reliability in use.
Technical specifications
| Parameter | Value |
|---|---|
| Purpose | For ovens |
| Type | Seal rubber |
| Dimensions (HxWxD) | 370x410x9 mm |
| Profile width | 11 mm |
| Profile height | 9 mm |
| Distance between hooks (unstretched) | 410 mm (width), 370 mm (height) |
| Number of hooks | 4 pcs. |
| Material | Heat-resistant rubber |
| Country of manufacture | Italy |
Compatibility with models
- Hotpoint 7OOS997DCIXRU/HA 3686330000
- Hotpoint OS 89 IX /HA 3572360000
- Hotpoint OS897DCIX/HP 3610700000
- Hotpoint OS89DIX/HA 3572370000
- Scholtes BC199DT0XA 3871080000
- Scholtes BC199DTXA 3654110000
- Scholtes BC199DTXAS 3804920000
- Scholtes BC99DCXA 3618980000
- Scholtes SV70DCNAB 3687960000
- Scholtes SV70DCNAX 3687970000
- Scholtes SV70SCNAB 3689480000
- Scholtes SV70SCNAX 3689490000
How to choose the right seal
When selecting a seal for your oven, pay attention to the following points:
- Dimensions: ensure that the seal's dimensions match your oven's specifications.
- Number of hooks: check that the number of hooks matches the fittings on the door.
- Material: choose seals made of heat-resistant rubber for long-lasting use.
Causes of failure and prevention methods
The door seal may fail for the following reasons:
- Material wear: over time, the rubber may lose its elasticity.
- Overheating: constant exposure to high temperatures can accelerate aging.
- Mechanical damage: careless closing of the door can damage the seal.
To prevent wear, monitor the condition of the seal, avoid overheating, and close the oven door gently.
Difficulty of replacement
Replacing the door seal is a relatively simple procedure that can be done by yourself. Here’s a general replacement algorithm:
- Open the oven door and remove the old seal by gently pulling it out of the grooves.
- Clean the surface of any adhesive residue and dirt.
- Install the new seal, starting from one of the corners and evenly distributing it around the perimeter.
- Ensure that the seal is securely fixed and free of twists.
Replacement difficulty rating: 2 out of 5. Minimal tools and skills are required to complete the job.