|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Sealing ring for Bosch steam generator and iron (00624466)
The sealing ring is designed to ensure the airtightness of Bosch and Siemens steam generators and irons, preventing steam leakage and ensuring the efficient operation of the device. The diameter of the sealing ring is 24 x 3.5 mm, making it an ideal choice for replacing a worn component.
Technical specifications and compatibility
| Parameter | Value |
|---|---|
| Diameter | 24 mm |
| Thickness | 3.5 mm |
Compatible models:
- Bosch: TDS4581, TDS2018GB, TDS2241, TDS2221, TDS4570, TDS2229, TDS2210, TDS2016, TDS2215, TDS2211, TDS2242, TDS4560, TDS451510L, TDS4580, TDS2031GB, TDS2250, TDS2240, TDS2220, TDS2255, TDS4570GB, TDS4540, TDS2251, TDS4545, TDS4571GB, TDS2011, TDS222510H, TDS4530, TDS2229GB, TDS4550, TDS2019GB, TDS2280GB
- Siemens: TS45XTRMW, TS20XTRM2, TS45200, TS22XTRM, TS45XTRM24, TS22XTRM24, TS22450, TS203100X, TS22EXTREM, TS22XTRMW, TS45320, TS45EXTREM, TS45359, TS45XTRMGB, TS2231100, TS45350, TS45300, TS45450
How to choose the right product
When selecting a sealing ring, pay attention to the following parameters:
- Compare the dimensions (diameter and thickness) with the original sealing ring.
- Ensure that the sealing ring is compatible with your model of iron or steam generator.
- Check the material to ensure it meets the requirements of your device.
Possible causes of failure and prevention methods
Sealing rings can fail for the following reasons:
- Material wear due to high temperatures and steam pressure.
- Chemical exposure from cleaning agents.
- Mechanical damage during installation or operation.
To prevent premature wear of the sealing ring:
- Regularly check the condition of the sealing ring and replace it at the first signs of damage.
- Avoid using aggressive cleaning agents.
- Ensure proper operation of the device, not exceeding the allowable temperatures and pressures.
Difficulty of part replacement
Replacing the sealing ring is a fairly simple procedure that can be done by yourself. Difficulty rating — low. Follow these steps:
- Disconnect the device from the power supply.
- Remove the old sealing ring from its installation site.
- Clean the surface of any remnants of the old sealing ring.
- Install the new sealing ring, ensuring it is properly secured.
- Reconnect the device and check its functionality.
By following these recommendations, you can effectively replace the sealing ring and extend the life of your iron or steam generator.