|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Universal thermocouple for gas water heaters Termet, Bosch, Junkers
The universal thermocouple is designed for gas water heaters from the brands Termet, Bosch, and Junkers. This thermocouple ensures reliable operation of gas equipment, serving as an important element of the safety system. Its main function is to maintain the necessary temperature and control the gas supply. This model is suitable for various systems, making it an excellent choice for professionals and DIY enthusiasts.
Technical specifications
| Parameter | Value |
|---|---|
| Connection | Knife-type terminal ("female") for 6.3 mm |
| Total length (±20 mm) | 1720 mm (all conductors) |
| Length of conductors (±10 mm) | 220, 700, 800 mm |
| Connection to valve | M8x1 or M10x1 |
| Depth of thermocouple seating | 33 mm |
| Dimensions of the working part of the tip | Ø 4/2.5 mm, length 15 mm |
| Total length of the tip | 36 mm |
| Diameter of tip seating | 4.8 mm |
Compatibility
The thermocouple is compatible with the following models of gas water heaters:
- WR series models
- WRD
- WT
- WTD
It is also compatible with other gas water heaters operating on G19-01.
How to choose the right product
When selecting a thermocouple, pay attention to the following factors:
- Compatibility with your equipment — check the model and type of connection (M8x1 or M10x1).
- Length of conductors — ensure that the length of the thermocouple meets your device's requirements.
- Material quality — choose trusted brands for reliability and durability.
Possible causes of failure and prevention methods
The main reasons for thermocouple failure include:
- Overheating — avoid prolonged operation at maximum temperatures.
- Mechanical damage — protect conductors from mechanical impacts.
- Contamination — regularly check and clean connections from dirt and corrosion.
To prevent wear, monitor the condition of the gas water heater and perform regular maintenance.
Difficulty of part replacement
Replacing the thermocouple is a process that can be done independently with basic skills in working with gas water heaters. It is recommended to follow these steps:
- Turn off the gas and allow the heater to cool down.
- Remove the protective cover (if any).
- Unscrew the old thermocouple from the valve.
- Install the new thermocouple, ensuring proper connection.
- Secure the thermocouple and check the tightness of the connections.
- Turn on the heater and check its operation.
The difficulty of replacement can be assessed as low; however, if you are unsure of your abilities, it is better to consult a specialist.