|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Universal vacuum cleaner brush without rollers 35 mm WPRO 481281728736
The universal brush for the WPRO 481281728736 vacuum cleaner is designed for effective dry cleaning of floors and carpets. With a connection diameter of 35 mm, it is perfectly suited for various vacuum cleaner models with a variable hole diameter ranging from 30 to 37 mm. This brush does not have rollers, making it easy to use and suitable for cleaning on any surface.
Technical specifications
| Parameter | Value |
|---|---|
| Type of cleaning | Dry |
| Purpose | For floors/carpets |
| Attachment type | Without latch |
| Connection hole, D | 30-37 mm (variable diameter) |
| Connection type | To the pipe |
How to choose the right product
When selecting a universal brush for your vacuum cleaner, pay attention to the following points:
- Connection diameter: ensure that the brush diameter matches the diameter of your vacuum cleaner's pipe (30-37 mm).
- Type of cleaning: for dry cleaning, choose brushes without rollers, as they handle dust and dirt better on both hard and soft surfaces.
- Compatibility: check if this brush is suitable for your vacuum cleaner, especially if you have a model with non-standard connection parameters.
Possible causes of malfunction and prevention methods
Some reasons why the brush may fail include:
- Clogging: hair, dust, and debris can block the brush. Regularly clean the brush of contaminants.
- Mechanical damage: avoid impacts and drops of the brush to prevent cracks and damage.
To prevent wear on the brush, it is recommended to use it only for its intended purpose and avoid cleaning on wet or overly rough surfaces.
Difficulty of part replacement
Replacing the WPRO 481281728736 universal brush is a simple procedure and can be done independently. Follow these steps:
- Disconnect the vacuum cleaner from the power supply.
- Remove the old brush by pulling it sideways if it is installed without a latch.
- Install the new brush by carefully inserting it into the appropriate hole.
- Reconnect the vacuum cleaner and check the brush's operation.
The difficulty level of the replacement can be rated as low, and it will take just a few minutes.