|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Grill thermocouple holder for Electrolux gas stoves (3420067229)
The grill thermocouple holder is designed for use in Electrolux gas stoves and compatible models. It provides secure mounting for the thermocouple, which is responsible for temperature control in the oven, critical for proper cooking. Replacing this component is necessary if you notice issues with temperature readings or lack of heating in the grill.
Specifications and compatibility
| Manufacturer | Model |
|---|---|
| Electrolux | EKG500104W, EKG501101W, EKG500102W, EKG500100W, EKG500101W, EKG500103W, EKG500105W, EKG500106W, EKG501104W, EKG501105W, EKG551101W, EKG800100W, EKG500107W, EKG500108W, EKG500110W, EKG5006, EKG551100W, EKG551102W |
| Zoppas | P85, PW55, PW550AS, PB85C, PB85S, PB85W, PR55S, PW55S, PX550AS, PX55AS |
| Rex Electrolux | RKG501100W, RKG501101W, RKG501101X |
| Corbero | 5030HGB7, 5030HGLB7, 5030HGLN7, 5030HGN7, 5040HGB7, 5040HGCB7, 5040HGCN7, 5040HGN7, 5540HGB4, 5540HGN4, 8550HGB4, 5040HGICB7, 5040HGICN7, 5040HGRCB7, 8550HGIL4 |
| Faure | BGL802W, BGL802W1, BGL803W, CGC415W, CGC417W, CGC421W, CGC534W1, CGL406W1, CGL409W, CGL410W1, CGL413W, BGL802M, BGL802M1, CGL410M1, CGL413B, CGC532W, CGL410W, CGL507W, CGL528W |
| Tricity Bendix | SG205/1WL, SG210/1W |
| Zanussi | ZCG050GW, ZCG051GWC, ZCG052GW1, ZCG546TS, ZCG550GW6, ZCG551GW1, ZCG552GW, ZCG552GW1, ZCG552GW2, ZCG553GW1, ZCG553GW2, ZCG554GW, ZCG555GW1, ZCG556GW, ZCG556GW1, ZCG557GW, ZCG557GW1, ZCG557GW2, ZCG558GW1, ZCG559GW, ZCG55AGW, ZCG55EGW1, ZCG55FGW1, ZCG55GGW1, ZCG55HGW1, ZCG55JGW1, ZCG55KGW1, ZCG55LGW1, ZCG55MGW1, ZCG55NGW1, ZCG55PGW1, ZCG55RGW1, ZCG55SGW1, ZCG560GW1, ZCG561GW1, ZCG562GW1, ZCG563GW1, ZCG564GW1, ZCG567GW1, ZCG568GW, ZCG568GW1, ZCG56AGW1, ZCG850GW, ZCG565GW1, ZCG55FGW, ZC542TS, ZC542TSC, ZCG050GW2, ZCG051GW1, ZCG053GW, ZCG054GW, ZCG550GW1, ZCG550GW2, ZCG550GW5, ZCG550GX1, ZCG551GX1, ZCG552GWB, ZCG552GX1, ZCG553GM1, ZCG553GX1, ZCG558GX, ZCG559GWB, ZCG55BGW1, ZCG55BGX, ZCG55TGW1, ZCG853GW, ZCG853GWB, ZCG854GWB, ZCG854GXB, ZCG5000M, ZCG546TSX, ZCG550GW, ZCG550GW2, ZCG550GW5, ZCG550GX1 |
| Rex | RKG501100W |
| FAR | C0145S, C0145, C0145SF |
| Horn | HCB754TH, HCG505TH, HCB754, HCG505, HCG506 |
| Curtiss | RCB754TH, RCB756TH, RCG50TH, RCG50, RCG56, S754L, S756L |
| Arthur Martin | BU8807W |
| Cobal | COB504 |
| Funix | FB84L, FCG50 |
How to choose the right product
When selecting a grill thermocouple holder, ensure that the part number (3420067229) matches your old component. Check compatibility with your stove model using the compatibility table above. Also, pay attention to the quality of the material; it is recommended to choose original or certified parts to ensure durability and reliable operation of the device.
Possible causes of failure and prevention methods
The main reasons for the failure of the thermocouple holder include:
- Overheating due to improper use.
- Mechanical damage during cleaning or use.
- Corrosion from moisture exposure.
To prevent premature wear, keep the device clean and intact, avoid overheating, and periodically check the condition of the thermocouple. It is also advisable to avoid moisture exposure to electrical components.
Difficulty of part replacement
Replacing the thermocouple holder is a relatively simple procedure that can be done by yourself. Follow these steps:
- Disconnect the stove from the power supply and gas.
- Remove the old holder by carefully unscrewing the fasteners.
- Install the new holder, ensuring it is securely fastened.
- Connect the thermocouple to the new holder.
- Check functionality by reconnecting the stove.
The difficulty of replacement can be rated as low, and it may take about 30-60 minutes, depending on your experience.