|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Micro switch holder for boilers and water heaters
The micro switch holder is designed for installation in boilers and water heaters. This component ensures a secure attachment for the micro switch, which is responsible for the automatic control of the device's operation. Sturdy and durable, this holder is made of steel and is intended for use in gas water heaters of Chinese manufacture and other similar devices.
Technical specifications
| Parameter | Value |
|---|---|
| Purpose | For boilers and water heaters |
| Type | Holders |
| Micro switch attachment in holder | Threaded holes M2 - 2 pcs., center distance 10.2 mm |
| Holder attachment | Holes Ø 3.8 mm - 2 pcs., center distance 16.5 mm |
| Length of the push bar | 40 mm |
| Length of the holder | 33 mm |
| Width of the holder | 18 mm |
| Height of the holder | 23 mm |
| Material | Steel |
| Country of manufacture | China |
How to choose the right product
When selecting a micro switch holder, pay attention to the following points:
- Compatibility with your boiler or water heater. Ensure that the holder's dimensions match your device.
- Type of attachment. Check that the threaded holes and center distance are suitable for your micro switch.
- Material. Steel products provide durability and resistance to high temperatures and humidity.
Possible causes of failure and prevention methods
Causes of micro switch holder failure may include:
- Material wear due to high temperature and humidity.
- Mechanical damage during operation.
- Corrosion of metal parts.
To prevent wear, regularly check the condition of the holder and micro switch. Ensure that the devices are not subjected to excessive loads and follow the manufacturer's recommended operating conditions.
Difficulty of part replacement
Replacing the micro switch holder does not require special skills and can be done independently. Follow these steps:
- Disconnect the power supply to the device for safety.
- Remove the old holder by unscrewing the mounting screws.
- Install the new holder in place, ensuring that all holes align.
- Secure the holder by tightening the screws firmly.
- Reconnect the power and check the functionality of the micro switch.
The difficulty of replacement can be rated as low, and even a beginner can handle this task.