|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Filter holder ALUM/POL.V2 for Saeco coffee machines (996530009582)
Filter holder ALUM/POL.V2 is an essential component for Saeco coffee machines, providing secure attachment for the filter. It is designed to ensure the proper functioning of the coffee machine, allowing the filter to trap impurities and maintain water purity for coffee preparation. This holder is compatible with a wide range of models, making it a versatile solution for replacing broken holders.
Technical specifications and compatibility
| Part number | 996530009582 |
|---|---|
| Compatibility with models | HD8327/03, HD8323/31, HD8325/71, HD8327/91, HD8423/01, HD8423/11, HD8423/19, HD8425/01, HD8425/11, HD8427/01, HD8427/11, HD8427/19, HD8323/01, HD8323/02, HD8323/05, HD8323/07, HD8323/08, HD8323/41, HD8323/42, HD8323/43, HD8325/01, HD8325/03, HD8325/05, HD8325/07, HD8325/08 |
How to choose the right product
When selecting a filter holder, pay attention to the following points:
- Check the part number: it should match 996530009582.
- Ensure compatibility with your coffee machine model by using the list of compatible models above.
- Inspect the condition of your current holder: if it is cracked or misshapen, replace it with a new one.
Possible causes of failure and prevention methods
The filter holder may fail for the following reasons:
- Mechanical damage: impacts or drops can lead to cracks.
- Wear and tear: continuous use may cause material deformation.
- Improper installation: if the holder is not installed carefully, it may become damaged.
To avoid premature wear, we recommend:
- Regularly check the condition of the holder.
- Refer to the user manual when installing the filter.
- Use only original filters that are compatible with your coffee machine.
Difficulty of part replacement
Replacing the filter holder ALUM/POL.V2 does not require special skills and can be done independently. The replacement process includes the following steps:
- Disconnect the coffee machine from the power source.
- Remove the old filter holder.
- Install the new holder in its place.
- Ensure it is securely fastened.
- Reconnect the coffee machine and check its functionality.
The estimated difficulty of replacement is low, and it will take only a few minutes.