|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Microwave transformer DW-1000NTC
The DW-1000NTC microwave transformer is a key component that ensures the operation of microwave ovens by converting voltage to power the magnetron. With a power rating of 1000 W, this transformer is suitable for most standard microwave models, providing stable and safe operation of the appliance.
Specifications
| Feature | Value |
|---|---|
| Power | 1000 W |
| Voltage and frequency | ~220 V, 50 Hz |
| Connection terminals | 1 terminal 6.3 mm, 2 terminals 4.8 mm, 2 6.3 mm "female" terminals, 1 4.8 mm "female" terminal |
| Wire length | 150 mm |
| Core dimensions | Approximately 96 x 83 x 78 mm |
| Base plate size | Approximately 100 x 97 x 1.7 mm |
| Mounting | 2 holes Ø 5.5 mm + 5 holes Ø 3 mm |
How to choose the right transformer
When selecting a transformer for your microwave oven, be sure to consider the following parameters:
- Power: Ensure that the power rating of the transformer matches the requirements of your microwave (in this case, 1000 W).
- Voltage: Check that the transformer voltage is ~220 V.
- Connection parameters: Compare the number and type of terminals with your old transformer.
- Dimensions: Make sure the size of the transformer fits the space in your appliance.
Causes of failure and wear prevention
The main reasons a transformer may fail include:
- Overheating due to prolonged operation at maximum power.
- Short circuit in the electrical circuit.
- Aging of wire insulation, which can lead to breakdowns.
To prevent wear, it is recommended to:
- Regularly check the condition of wires and terminals for damage.
- Avoid overheating the appliance—ensure good ventilation.
- Use the microwave according to the manufacturer's instructions.
Difficulty of transformer replacement
Replacing the transformer in a microwave oven is considered a moderately difficult task. To perform the replacement, follow these steps:
- Disconnect the microwave from the power supply.
- Remove the cover of the appliance, following the instructions in the manual.
- Disconnect the old transformer, noting the order of the wire connections.
- Install the new transformer in place of the old one and connect the wires according to the noted configuration.
- Close the cover of the appliance and reconnect it to the power supply for testing.
If you have experience in electronics repair, the replacement will take about 30-60 minutes. If you are unsure of your abilities, it is better to consult a professional.