|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
KSD301, KSD302, KSD303 thermostat - 165°C 15A
The KSD301, KSD302, and KSD303 thermostats are designed for temperature control in various household appliances. They provide reliable disconnection of the electrical device when the set temperature of 165°C is reached. This thermostat is suitable for a wide range of applications, including electric stoves, heaters, and other devices that require temperature monitoring. Its normally closed contact ensures safe operation of the equipment.
Technical specifications
| Parameter | Value |
|---|---|
| Rated voltage | 250V |
| Rated current | 15A |
| Disconnection temperature | 165°C (±5%) |
| Distance between mounting holes | 21-26 mm |
| Body diameter | 16 mm |
| Connection | 2 contacts (6.3 mm) |
| Reset button | No |
| Features | Normally closed contact |
| Country of manufacture | China |
How to choose the right thermostat
When selecting a thermostat, it is important to consider several factors:
- Ensure that the rated voltage and current match the specifications of your device.
- Check the temperature parameters to ensure the thermostat disconnects at the desired temperature.
- Pay attention to the distance between mounting holes and the body diameter for proper installation.
- If in doubt, it is best to consult a professional or refer to the documentation for your equipment.
Possible causes of malfunction and prevention methods
Malfunction of the thermostat can occur for the following reasons:
- Overheating of the device due to exceeding the allowable temperature.
- Contact failure due to corrosion or mechanical damage.
To prevent wear of the thermostat, it is recommended to:
- Regularly check the condition of connected devices and their ventilation.
- Avoid current overload, especially if the thermostat is used in high-temperature conditions.
Difficulty of thermostat replacement
Replacing the KSD301, KSD302, or KSD303 thermostat is a moderately difficult task. To replace it, follow these steps:
- Disconnect the device from the power supply.
- Remove the cover or panel to access the thermostat.
- Disconnect the wires from the old thermostat, noting their arrangement.
- Remove the thermostat by unscrewing the mounting screws.
- Install the new thermostat in reverse order, connecting the wires according to the instructions.
- Close the panel and reconnect the device to the power supply.
Following these steps will ensure the proper replacement of the thermostat and its reliable operation thereafter.
