|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
SIT thermocouple with thermocutoff (Type A1) - 600 mm
The SIT thermocouple with thermocutoff is designed for temperature control and safety in gas appliances. It features a Type A1 head and connects to a valve with an M9x1 thread. This thermocouple has a length of 600 mm, making it suitable for use in various models of home gas appliances. It is ideal for repairs and replacements in gas stoves, water heaters, and other devices where temperature control is essential.
Technical specifications
| Length of thermocouple: | 600 mm |
| Type of head: | A1 |
| Connection to valve: | M9x1 |
| Thread length: | 13.5 mm |
| Heating time: | 6 seconds |
| Response time: | 30-60 seconds |
| Voltage output at 100°C: | 2 mV |
| Maximum operating temperature: | 600°C |
| Minimum bending radius: | 15 mm |
How to choose the right product
When selecting a SIT thermocouple, pay attention to the following parameters:
- Type of head (A1) - ensure it matches your device.
- Connection to valve - check that the thread is M9x1.
- Length of thermocouple - choose the necessary length based on the installation in your appliance.
It is also important to ensure that the technical specifications of the thermocouple meet the requirements of your device.
Possible causes of failure and prevention methods
The thermocouple may fail for the following reasons:
- Overheating - may be caused by incorrect gas valve settings.
- Mechanical damage - for example, during improper installation.
- Contamination - dirt or other particles can affect the function of the thermocouple.
To prevent wear, it is recommended to:
- Regularly check and clean the thermocouple from contaminants.
- Check valve settings to avoid overheating.
Difficulty of replacement
Replacing the SIT thermocouple is considered moderately difficult. To replace it, you will need to:
- Disconnect the gas appliance from the power supply and turn off the gas supply.
- Remove the old thermocouple by unscrewing the threaded connection.
- Install the new thermocouple, ensuring the connections are correct.
- Check all connections for leaks.
- Turn on the appliance and test its operation.
If you are unsure of your abilities, it is better to consult a qualified professional for the thermocouple replacement.