«Payment by installments» of monobank
payments
of $14.67
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Gas control thermocouple for Electrolux gas stove 3570563035 (750 mm)
The thermocouple is designed to ensure the safe operation of the gas stove by monitoring the presence of flame in the oven. This is an essential component that prevents gas leakage in case the flame goes out for any reason. It connects via a "tulip" type connector, providing ease of installation and a reliable connection.
Technical specifications
| Parameter | Value |
|---|---|
| Connection | tulip type connector |
| Total length | 750 mm |
| Lead length | 695 mm |
| Sensor length | 34 mm (4 mm + 3.3 mm + groove 2.2 mm + 3.4 mm + 4.5 mm + stop ring 0.6 mm + 16 mm) |
| Working part dimensions of the tip | Ø 3.3 mm, length 10 mm |
| Groove size | Ø 5.3 mm, width 2.2 mm |
Compatible models
The thermocouple is suitable for the following models:
- Electrolux 12550G-FM
- Electrolux 12550G-M
- Electrolux 35940G-M
- Electrolux 35941G-M
- Electrolux 35944G-M
- And many other Electrolux and Zanussi models.
How to choose the right product
When selecting a thermocouple, consider the following points:
- Ensure that the length of the thermocouple meets the requirements of your gas stove.
- Check the connection type - tulip connector.
- Compare the dimensions of the working part and groove with the original part to ensure compatibility.
- Verify the presence of compatible models in the list.
Possible causes of failure and prevention methods
The thermocouple may fail for the following reasons:
- Overheating or prolonged operation at high temperatures.
- Physical damage to the leads or sensor.
- Corrosion of connections due to moisture exposure.
To prevent wear, it is recommended to:
- Regularly check the condition of the thermocouple and clean it from contaminants.
- Avoid overheating the device.
Difficulty of part replacement
Replacing the thermocouple is a task of moderate difficulty. To perform the replacement, follow this step-by-step guide:
- Disconnect the gas stove from the power supply and turn off the gas supply.
- Remove the protective cover, if present.
- Disconnect the old thermocouple from the connector.
- Remove the fasteners holding the thermocouple in place.
- Install the new thermocouple by following the reverse order.
- Reconnect the gas stove and check the operation of the new thermocouple.
If you are unsure of your abilities, it is recommended to consult a professional for the replacement.
