«Payment by installments» of monobank
payments
of $2.33
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Gas control thermocouple for oven, universal (900 mm) (0102)
The gas control thermocouple is an important component for ensuring the safety and efficient operation of gas ovens. This universal thermocouple, measuring 900 mm in length, is designed to monitor the temperature in ovens, preventing gas leaks and ensuring stable device operation.
Technical specifications
| Parameter | Value |
|---|---|
| Total length (±5 mm) | 900 mm |
| Total length of thermocouple tip (±1 mm) | 63 mm |
| Length of thermocouple temperature sensor (±1 mm) | 18 mm |
| Diameters of thermocouple temperature sensor | 3/4 mm |
| Thread diameter on tip | 6 mm |
| Tube diameter | 3 mm |
| Thread diameter on thermocouple | 9 mm |
| Package contents | Thermocouple - 1 pc., adapter - 5 pcs. |
| Thread on adapter 1 | G 10 mm |
| Thread on adapter 2 | G 9 mm |
| Thread on adapter 3 | G 8/10 mm |
| Voltage | 30 mV |
| Country of manufacture | China |
How to choose the right thermocouple
When selecting a gas control thermocouple for your oven, consider the following factors:
- Length of the thermocouple — ensure it is suitable for your device (in this case, 900 mm).
- Type of thread and diameter — check that the dimensions match your old thermocouple.
- Package contents — if adapters are needed, make sure they are included.
Possible causes of failure and prevention methods
Thermocouple failures can occur for the following reasons:
- Wear due to high temperatures — avoid overheating the oven.
- Mechanical damage — handle the device carefully during repairs.
- Incorrect installation — follow the instructions when replacing the thermocouple to prevent damage.
Difficulty of thermocouple replacement
Replacing the thermocouple in an oven can vary in difficulty, but it is generally a task of moderate complexity. If you have basic tool skills, you should be able to perform the replacement yourself. Here is a simple guide for replacement:
- Disconnect the oven from the power supply and gas.
- Remove the old thermocouple by disconnecting it from the gas valve.
- Install the new thermocouple, following the manufacturer's instructions.
- Connect the thermocouple to the gas valve and check the connections.
- Turn on the oven and check the operation of the thermocouple.
Following these recommendations will help you avoid frequent breakdowns and extend the lifespan of your oven.
