«Payment by installments» of monobank
payments
of $7.00
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Gas control thermocouple for ovens Tripla, Corona, Per H4776 (515mm)
The gas control thermocouple is an essential component for ensuring safety and proper operation of ovens. This thermocouple is designed for Tripla, Corona, and Per models, providing temperature control within the oven. In the event of overheating or flame loss, the thermocouple automatically shuts off the gas supply, preventing potential emergency situations.
Technical specifications
| Parameter | Value |
|---|---|
| Overall length (±10 mm) | 515 mm |
| Thread diameter to valve | - |
| Thread pitch to valve | - |
| Thread diameter of the tip | 6 mm |
| Thread pitch of the tip | 0.75 mm |
| Length of the thermocouple temperature sensor (±1 mm) | 13 mm |
| Diameters of the thermocouple temperature sensor | 2/3.5 mm |
| Length of the thermocouple tip (±1 mm) | 38 mm |
| Diameters of the thermocouple tip | 5/6 mm |
| Country of manufacture | China |
| Application | For ovens |
How to choose the right product
To select the correct thermocouple, ensure you know your oven model. Compare the thermocouple specifications with the original part. Pay attention to the length, diameter, and thread pitch, as these affect compatibility. If in doubt, consult a professional or contact customer support.
Possible causes of failure and prevention methods
The main reasons for thermocouple failure may include:
- Wear due to high temperatures
- Mechanical damage during installation or use
- Corrosion due to moisture exposure
To prevent wear, follow these recommendations:
- Regularly check the condition of the thermocouple and surrounding components.
- Keep the oven clean, avoiding the buildup of grease and moisture.
- Avoid overheating the oven, monitoring temperature settings.
Difficulty of part replacement
Replacing the thermocouple is a task of moderate difficulty. To replace the thermocouple, follow these steps:
- Disconnect the oven from the power supply and gas.
- Remove the protective panel to access the thermocouple.
- Disconnect the old thermocouple from the valve and temperature sensor.
- Install the new thermocouple, following the instructions.
- Check the installation and connections for accuracy.
- Turn on the oven and test its operation.
If you lack repair experience, it is recommended to consult a qualified technician for the replacement.
