|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gas control thermocouple for Gefest GF-091 oven, M8x1.0 (850 mm)
The Gefest GF-091 gas control thermocouple ensures the safe operation of gas ovens by preventing gas leaks. This part has a length of 850 mm (with a tolerance of ±10 mm) and a valve thread diameter of 8 mm. When installed in the device, the thermocouple automatically shuts off the gas supply to the burner if the flame goes out. This makes it an essential component for ensuring the safe operation of gas appliances.
Technical specifications
| Specification | Value |
|---|---|
| Overall length | 850 mm (±10 mm) |
| Valve thread diameter | M8x1.0 |
Compatibility with models
The gas control thermocouple is suitable for use in Gefest GF-091 ovens. Before purchasing, ensure that your appliance is compatible with this thermocouple model by checking the technical documentation or the device's labeling.
How to choose the right product
When selecting a thermocouple, pay attention to the following points:
- Thermocouple length — check if it meets the requirements of your appliance.
- Thread diameter — ensure it matches the size of your valve (in this case, M8x1.0).
- Manufacturer — choose parts from reputable brands to guarantee quality and reliability.
Possible causes of failure and prevention methods
The thermocouple may fail for the following reasons:
- Overheating — can occur with prolonged use at high temperatures.
- Mechanical damage — sharp objects or improper installation can damage the thermocouple.
- Corrosion — using low-quality gas can lead to deposits forming.
To prevent wear, it is recommended to:
- Regularly check and clean the oven.
- Monitor gas quality and use only recommended types of fuel.
- Avoid sharp temperature fluctuations.
Difficulty of part replacement
Replacing the thermocouple is a moderately complex task and can be done independently. Follow these steps:
- Turn off the gas and allow the oven to cool down.
- Remove the protective cover, if present.
- Disconnect the old thermocouple from the valve.
- Install the new thermocouple, ensuring proper thread installation.
- Connect the thermocouple to the valve and check the reliability of the connection.
- Turn on the gas and check the operation of the device.
If you are unsure of your abilities, it is recommended to consult a professional to perform this work.