|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Thermocouple for Kare boiler L=400 mm M8x1.0/M10x1.0 (30.0501)
The thermocouple for the Kare boiler is designed to monitor temperature in gas boilers. It is used for connection to the valve and ensures stable operation of the device. This thermocouple is compatible with boilers equipped with KARE automation and is suitable for models with a power output of up to 25 kW, such as Danko and Rivneterm.
Technical specifications
| Specification | Value |
|---|---|
| Total length | 400 mm (±20 mm) |
| Lead length | 340 mm (±10 mm) |
| Connection to valve | M10x1.0 |
| Thermocouple mounting | M8x1.0, length 27 mm |
| Dimensions of the working part of the tip | Ø 4/2.5 mm, length 16 mm |
| Total length of the tip | 54 mm |
How to choose the right product
When selecting a thermocouple, pay attention to the following parameters:
- Length of the thermocouple: ensure it is suitable for your boiler.
- Type of connection: check the dimensions and thread of the M8x1.0 and M10x1.0 connections.
- Compatibility: make sure the thermocouple is suitable for your boiler model and uses KARE automation.
Possible causes of failure and prevention methods
A thermocouple may fail for several reasons:
- Overheating: constant exceeding of the operating temperature can lead to thermocouple overheating.
- Corrosion: exposure to moisture and gas can cause corrosion.
- Mechanical damage: improper installation or strong impacts can damage the thermocouple.
To prevent wear, it is recommended to:
- Regularly check the condition of the thermocouple.
- Install the thermocouple according to the manufacturer's instructions.
- Perform preventive maintenance on the gas boiler.
Difficulty of part replacement
Replacing the thermocouple is of moderate difficulty. To replace it, follow these steps:
- Disconnect the boiler from the power supply and close the gas valve.
- Remove the protective cover, if present.
- Unscrew the old thermocouple, carefully disconnecting it from the valve.
- Install the new thermocouple, following the connection instructions.
- Check the connections for tightness and reconnect the boiler to the power supply.
- Start the boiler and check its operation.
If you are unsure of your abilities, it is better to consult a qualified specialist.