|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Thermocouple for gas water heater VPG L=350 mm M8x1.0 (0201)
Thermocouple for gas water heater VPG is a key component that ensures the reliable operation of your water heater. This thermocouple is installed in gas water heaters, providing temperature control and safety during operation. It is the perfect solution for those looking to replace a faulty thermocouple, ensuring a stable gas supply and protection against overheating.
Technical specifications
| Purpose | For water heaters |
| Type | Thermocouple |
| Total length | 350 mm (±20 mm) |
| Lead length | 290 mm (±10 mm) |
| Connection to valve | M8x1.0 |
| Thermocouple mounting | M8x1.0 nut |
| Dimensions of the working part of the tip | Ø 4/2.5 mm, length 17 mm |
| Total length of the tip | 54 mm |
| Package contents | Thermocouple with lead - 1 pc. |
| Country of manufacture | China |
How to choose the right product
When selecting a thermocouple for a gas water heater, pay attention to the following aspects:
- Ensure that the length of the thermocouple meets the requirements of your device (350 mm).
- Check that the connection type matches your valve (M8x1.0).
- Note the dimensions of the working part and tip for proper installation.
Possible causes of failure and prevention methods
Thermocouple failures can occur for the following reasons:
- Wear due to prolonged use.
- Overheating due to incorrect gas valve settings.
- Mechanical damage during installation or maintenance.
To prevent premature wear, follow these recommendations:
- Regularly check the settings of your water heater.
- Ensure protection of the thermocouple from mechanical damage.
Difficulty of part replacement
Replacing the thermocouple has a medium level of difficulty. To perform the replacement, you will need basic tools such as wrenches and screwdrivers. Recommended steps:
- Turn off gas and electricity to the heater.
- Remove the protective cover, if present.
- Disconnect the old thermocouple from the valve and remove it.
- Install the new thermocouple following the installation instructions.
- Reconnect the gas and check functionality.
With the right approach and the necessary tools, you can replace the thermocouple yourself, saving you time and money.