|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Thermex ATT (06) thermometer for boilers
Product description
Thermex ATT (06) thermometer is designed to measure the water temperature in Thermex boilers. This device allows you to monitor and maintain the optimal temperature regime, which contributes to the efficient operation of your water heater. The removable probe provides flexibility in use; however, please note that the probe is not included.
Specifications
| Feature | Value |
|---|---|
| Probe type | Removable |
| Probe included | No |
| Screen backlight | No |
| Minimum measurable temperature | -20 °C |
| Minimum operating temperature | -35 °C |
| Maximum operating temperature | 60 °C |
| Measurement accuracy | 2% |
| Power source | AAA |
| Country of manufacture | China |
Selection tips
When choosing a thermometer for your Thermex boiler, pay attention to the following points:
- Compatibility: Ensure that the thermometer is suitable for your specific boiler model.
- Probe type: If you need a removable probe, make sure it is compatible with your thermometer.
- Temperature ranges: Ensure that the minimum and maximum temperatures meet your needs.
- Measurement accuracy: The lower the error, the more accurate data you will receive.
Causes of failure and prevention
The most common causes of thermometer failure include:
- Improper use, such as exceeding the maximum temperature.
- Mechanical damage to the probe.
- Battery wear or use of low-quality power sources.
To avoid failures, follow these recommendations:
- Regularly check the condition of the probe and replace it if necessary.
- Use high-quality batteries.
- Do not exceed the specified temperature limits.
Replacement recommendations
Replacing the Thermex ATT (06) thermometer is a relatively simple task. Follow these steps:
- Disconnect the boiler from the power supply for safety.
- Remove the old thermometer by carefully extracting the probe from its installation location.
- Install the new thermometer, ensuring it is securely fixed.
- Reconnect the boiler to the power supply.
- Check the functionality of the new thermometer by monitoring the temperature readings.
Replacement difficulty rating: Easy. The process will take no more than 15 minutes.