|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Convection heater for oven Italres RF.0049, 2000 W, Bosch Siemens 00752777
Convection heater for oven is a key component that ensures even heat distribution inside the oven, allowing for more efficient cooking. The Italres RF.0049 model, compatible with Bosch Siemens 00752777, has a power rating of 2000 W and is suitable for replacing a worn or damaged heater in your appliance.
Technical specifications
| Specification | Value |
|---|---|
| Power | 2000 W |
| Outer diameter | 197 mm (±3 mm) |
| Inner diameter | 184 mm |
| Connection | 2 double terminals 6.3 mm |
Compatibility
The convection heater is compatible with Italres and Bosch Siemens models with part number 00752777. Before purchasing, ensure that your heater matches these specifications to avoid unnecessary costs and inconveniences.
How to choose the right product
When selecting a convection heater, pay attention to the following parameters:
- Power: Ensure that the power of the new heater matches that of the old one.
- Diameter: Measure the outer and inner diameter of the heater to avoid discrepancies.
- Connection type: Check that the terminals of the new heater match the old ones.
Causes of failure and prevention methods
The heater may fail for several reasons:
- Overheating: Frequent use at maximum power without breaks.
- Moisture: Water exposure to the heater can cause a short circuit.
- Mechanical damage: Impact or dropping can damage the heater.
To prevent premature failure, follow these recommendations:
- Use the oven according to the manufacturer's instructions.
- Regularly clean the oven of grease and dirt.
- Avoid sudden temperature changes.
Difficulty of heater replacement
Replacing the convection heater is a moderately difficult task that can be done independently. Here are the steps to follow:
- Disconnect the oven from the power supply.
- Remove the protective grille and isolate the old heater.
- Disconnect the terminals from the old heater.
- Install the new heater by connecting its terminals.
- Secure the heater and replace the protective grille.
- Reconnect the oven to the power supply and check the functionality of the new heater.
By following these steps, you can easily install the new heater and restore your oven to working condition.
