|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Heating element for oven L=500 mm, 500 W, 220 V
General description:
The heating element (tubular electric heater) for ovens, measuring 500 mm in length, with a power of 500 W and a voltage of 220 V, is designed to provide efficient and even heating in electric ovens. This straight heating element is used as a replacement for faulty heating components, restoring the functionality of the appliance and enhancing the cooking process.
Technical specifications:
| Type | Straight heating element for electric stoves |
| Power | 500 W |
| Voltage and frequency | ~220 V/50-60 Hz |
| Connection | 2 terminals 6.3 mm |
| Tube length (excluding insulators) | 500 mm (±5 mm) |
| Total length | 550 mm (±5 mm) |
| Insulator width | 5 mm |
| Heating tube diameter | 6.5 mm |
| Quantity per package | 1 pc. |
| Manufacturer | China |
How to choose the right heating element:
When selecting a heating element for your oven, pay attention to the following points:
- Length and diameter: Ensure that the dimensions of the heating element meet your requirements.
- Power: Choose a power rating similar to the previously installed element to avoid overheating or insufficient heating.
- Connection type: Check that the terminals match your requirements.
Causes of possible failures and prevention methods:
The main causes of heating element failure may include:
- Burnout of the coil inside the tube, which can occur due to overheating.
- Damage to the insulation or integrity of the tube due to mechanical impacts.
- Exceeding permissible operating norms, for example, by using the oven at high temperatures for extended periods.
To prevent these issues, regularly check the condition of the heating element and avoid overheating. It is also recommended to keep the components clean and prevent food from coming into contact with the heating element during operation.
Difficulty of replacing the heating element:
Replacing the heating element is a relatively simple task that can be done independently. Difficulty rating – low. You will need:
- A screwdriver to remove the fasteners.
- A new heating element for replacement.
Follow these steps:
- Disconnect the oven from the power supply for safety.
- Remove the cover to access the old heating element.
- Disconnect the old heating element by unscrewing the terminals and fasteners.
- Install the new heating element by connecting the terminals and securing it in place.
- Check the reliability of the fastening and reassemble the oven.
By following these recommendations, you can easily and safely replace the heating element in your oven.