|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Thermex 1300W heating element for water heater (WH18W37)
The Thermex 1300W heating element is a reliable and high-quality component that ensures efficient water heating in Thermex water heaters. This heating element is made of stainless steel, which guarantees durability and resistance to corrosion.
Specifications
| Manufacturer | Whicepart (China) |
|---|---|
| Voltage | ~230V |
| Power | 1300W |
| Flange diameter | 64 mm |
| Length of heating element from flange | 315 mm (± 10 mm) |
| Thread diameter for anode | M4 (in.) |
| Connection | 2 terminals (6.3 mm) |
| Diameter of sleeves for thermal relay and thermostat | 7/8.5 mm |
| Length of sleeves for thermal relay and thermostat | 210/165 mm (± 5 mm) |
| Flange height | 9 mm (± 2 mm) |
Compatibility
Suitable for Thermex water heaters.
How to choose the right heating element
When selecting a heating element for your water heater, pay attention to the following points:
- Power and voltage: Ensure that the power of the heating element meets the requirements of your water heater.
- Flange diameter: Check that the flange diameter matches your device.
- Length of the heating element: Measure the length of the heating element to avoid installing one that is too short or too long.
- Type of connection: Make sure the type of connection matches your water heater.
Causes of heating element failure and prevention methods
The main causes of heating element failure:
- Corrosion: Stainless steel reduces the likelihood of corrosion, but it can still occur if operating conditions are not followed.
- Overheating: Frequent overheating can lead to failure. Use a thermostat to monitor the temperature.
- Improper installation: Ensure that the heating element is installed correctly to avoid mechanical damage.
Recommendations for replacing the heating element
- Disconnect the water heater from the power supply.
- Drain the water from the water heater.
- Remove the cover and unscrew the old heating element.
- Install the new heating element, ensuring that all dimensions and specifications match.
- Secure the heating element, connect the wires, and check the tightness of the connections.
- Fill the water heater with water and plug it into the power supply.
Difficulty assessment for replacement
Replacing the heating element is of moderate difficulty. If you have basic skills in working with electrical appliances, you should be able to complete this task yourself. Otherwise, it is recommended to consult a professional.