|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Dry heating element for boiler Zanussi Thermowatt 1000W
Description: The heating element for the Zanussi Thermowatt boiler with a power of 1000W is designed for efficient water heating in boilers. The dry element ensures high performance and reliability, making it an ideal choice for replacing worn or damaged heating elements in various boiler models.
Technical specifications
| Specification | Value |
|---|---|
| Power | 1000 W |
| Voltage | 220V |
| Total length of the heating element | 420 mm |
| Immersion length of the heating element | 390 mm |
Compatibility
The heating element is suitable for the following brands of boilers:
- Gorenje
- Electrolux
- Termal
- Tesy
- Fagor
- and others.
How to choose the right part
When selecting a heating element for your boiler, pay attention to the following aspects:
- Power and voltage: Ensure that the power and voltage of the heating element match the specifications of your boiler.
- Length of the heating element: Check that the total and immersion lengths of the heating element fit your boiler's design.
- Compatibility: Make sure the heating element is compatible with the brand and model of your boiler.
Causes of failure and prevention
The main causes of heating element failure may include:
- Wear due to prolonged use.
- Short circuit caused by insulation damage.
- Corrosion due to hard water.
To prevent damage to the heating element:
- Regularly descale the boiler.
- Use water softeners if you have hard water.
- Perform regular maintenance on the device.
Replacement recommendations
Replacing the heating element is a task of moderate difficulty. Follow these steps:
- Disconnect the boiler: Before starting work, be sure to disconnect the device from the power supply.
- Drain the water: Drain all the water from the boiler to avoid leaks.
- Remove the cover: Take off the cover to access the internal components.
- Disconnect the old heating element: Carefully disconnect the wires and remove the old heating element.
- Install the new heating element: Place the new heating element in the position of the old one and connect the wires.
- Close the cover: Ensure all components are reassembled and close the boiler cover.
- Fill the boiler: Fill the boiler with water and plug it back in.
By following these recommendations, you can independently replace the heating element in your boiler, extend its lifespan, and avoid premature failures.