|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Thermowatt RCF TW3 PA M6 2000 W 230V Heater Element (3401071) (WTH003UN)
Description: The heater element for the Thermowatt RCF TW3 PA M6 with a power of 2000 W and a voltage of 230 V is designed for heating water in boilers. This element provides efficient and rapid heating, making it an ideal choice for replacing an old or faulty heater in your boiler.
Technical specifications:
| Parameter | Value |
|---|---|
| Power | 2000 W |
| Voltage | 230 V |
| Model | RCF TW3 PA M6 |
| Article number | 3401071 (WTH003UN) |
Compatibility:
This heater element is compatible with various boiler models; however, it is recommended to check the technical documentation of your device or consult a professional before purchasing to avoid errors in selection.
How to choose the right part:
- Check the specifications of your boiler — power and voltage must match.
- Compare article numbers — ensure that the article number of the heater element matches your boiler.
- Pay attention to the type of connection — verify that the connector of the heater element fits your boiler.
Causes of heater element failure:
- Scale buildup — can lead to overheating and failure.
- Overheating — caused by incorrect thermostat settings or insufficient water in the boiler.
- Electrical issues — short circuits or damaged wires can lead to heater element malfunction.
Methods to prevent failures:
- Regular descaling — use specialized descaling agents.
- Check the water level in the boiler — avoid running the heater element dry.
- Regularly inspect electrical connections — ensure that wires are not damaged.
Recommendations for replacing the heater element (step-by-step):
- Disconnect the boiler from the power supply and ensure it has cooled down.
- Shut off the water supply to the boiler.
- Remove the protective cover, if present.
- Disconnect the old heater element by carefully unscrewing it and disconnecting the electrical connections.
- Install the new heater element following the manufacturer's instructions.
- Reconnect all electrical connections and check for tightness.
- Replace the protective cover and reopen the water supply.
- Reconnect the boiler to electricity and check its operation.
Difficulty rating for replacement:
Replacing the boiler heater element is a task of moderate difficulty and can be done independently with basic skills in working with electrical devices. However, if you lack experience, it is recommended to consult a professional technician.