«Payment by installments» of monobank
payments
of $5.00
No commission. The customer`s billing phone number must match the monobank customer`s financial number
Flanged heating element for boiler 1500 W, Reco
Description: The Reco heating element with short contacts is designed for use in boilers and other water heating devices. With a power of 1500 W and a length of 268 mm, this element provides efficient water heating and is suitable for various boiler models. It features a reliable design and easy installation, making it an excellent choice for both professional repair technicians and DIY enthusiasts.
Specifications
| Power: | 1500 W |
| Voltage/Frequency: | ~220 V/50-60 Hz |
| Connection: | 2 terminals 6.3 mm type "female" |
| Total length of heating element: | 295 mm |
| Mounting length: | 268 mm (from the edge of the flange) |
| Length of heating tubes: | 154 mm |
| Flange diameter: | 48 mm |
| Anode mounting: | M6 threaded hole |
| Heating element mounting: | M6 threaded hole |
Compatible models
The heating element is compatible with many boiler models, including:
- Ariston ABS BLU ECO 100 V
- Ariston ABS BLU ECO 30 V SLIM
- Ariston ABS DACHA R 100 V
- Ariston PRO ECO 100 V
- And many other Ariston models.
How to choose the right part
When selecting a heating element, it is important to consider the following points:
- Power: Ensure that the power of the heating element matches the requirements of your boiler.
- Length and diameter: Check that the length and diameter are suitable for your device.
- Connection type: Make sure the connection type is compatible with your terminals.
Causes of failure and prevention
The main causes of heating element failure may include:
- Corrosion from hard water.
- Overheating due to lack of water.
- Improper installation.
To prevent failures, it is recommended to:
- Regularly check the water level in the boiler.
- Use water filters to reduce hardness.
- Perform preventive replacement of the heating element every 3-5 years.
Replacement recommendations
- Disconnect the boiler from the power supply.
- Drain the water from the boiler.
- Remove the old heating element by unscrewing the mounting bolts.
- Install the new heating element, ensuring it is oriented correctly.
- Tighten the mounting bolts and connect the terminals.
- Fill the boiler with water and reconnect it to the power supply.
Replacement difficulty
Replacing the heating element has a medium level of difficulty and may require a basic set of tools, such as wrenches and screwdrivers. It is recommended to have your boiler's manual on hand for installation guidance.
