|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Ignition electrode for Smeg gas stove H5321, 22EE0040 (480mm)
The ignition electrode for the Smeg gas stove H5321, 22EE0040, is designed for reliable ignition of the gas mixture in household gas stoves. This component ensures safe and efficient burner ignition, which is essential for the operation of any gas stove. Make sure to choose original parts to maintain high standards of safety and performance for your appliance.
Specifications
| Parameter | Value |
|---|---|
| Wire length (±10 mm) | 480 mm |
| Total length of the electrode (±1 mm) | 27 mm |
| Base length (±1 mm) | 13 mm |
| Base diameter of the electrode | 8 mm |
| Diameter of the base mounting slot | 6 mm |
| Visible part length of the electrode (±1 mm) | 12 mm |
| Visible part diameter of the electrode | 6 mm |
| Connection | Terminal 3.2 mm (Female) |
| Country of manufacture | Italy |
How to choose the right product
When selecting an ignition electrode, make sure to check the following parameters:
- Wire length – it should match the installation location.
- Base and visible part diameter – check compatibility with your appliance.
- Connection – ensure the terminal is suitable for your gas device.
- Model compatibility – this electrode is suitable for Smeg gas stoves.
Possible causes of failure and prevention methods
The ignition electrode may fail for the following reasons:
- Wear due to frequent use.
- Contamination – food residues or grease can damage the electrode.
- Wire damage – mechanical damage can lead to a short circuit.
To prevent wear, regularly clean the area around the electrode from contaminants and check the integrity of the wires.
Difficulty of part replacement
Replacing the ignition electrode is considered to be of medium difficulty. You will need:
- Screwdriver.
- New part (ignition electrode).
Steps for replacement:
- Turn off the gas and electricity.
- Remove the old electrode by disconnecting the wires and fasteners.
- Install the new electrode, securing it in place.
- Reconnect the wires.
- Check the operation of the appliance by turning on the gas.
Ensure that all connections are secure to avoid gas leaks.