|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Water outlet connector for high-pressure cleaner 3/4 (6.465-031.0)
Product description: The water outlet connector is designed for connecting a hose to Karcher electric high-pressure washers. This component ensures a reliable and leak-proof water discharge, significantly enhancing the efficiency of the washers and preventing leaks. It is suitable for models using a standard connection size of 3/4 inch.
Technical specifications and compatibility
| Model | Code |
|---|---|
| Karcher HD 5/11 P | 1.520-960.0 |
| Karcher HD 5/11 P Plus | 1.520-961.0 |
| Karcher HD 5/12 C | 1.520-900.0 |
| Karcher HD 5/12 C Plus | 1.520-901.0 |
| Karcher HD 5/12 CX Plus | 1.520-902.0 |
| Karcher HD 5/13 C Plus | 1.520-921.0 |
| Karcher HD 6/15 C | 1.150-903.0 |
| Karcher HD 6/15 M Plus | 1.150-932.0 |
| Karcher K 2 Basic | 1.673-155.0 |
| Karcher K 2 Basic | 1.673-159.0 |
| Karcher K 3 | 1.676-000.0 |
| Karcher K 4 Full Control | 1.324-000.0 |
| Karcher K 4 Premium Full Control | 1.324-100.0 |
| Karcher K 5 Compact Home | 1.630-724.0 |
| Karcher K 5 Full Control | 1.324-500.0 |
| Karcher K 5 Premium Full Control Plus | 1.324-630.0 |
| Karcher K 5.600 | 1.181-200.0 |
| Karcher K 7 Compact | 1.447-002.0 |
| Karcher K 7 Compact Home | 1.447-004.0 |
| Karcher K 7 FULL CONTROL PLUS | 1.317-030.0 |
| Karcher K 7 Premium Full Control Plus | 1.317-130.0 |
| Karcher K 7.91 MD | 1.398-800.0 |
How to choose the right product
When selecting a water outlet connector, it is important to ensure compatibility with your high-pressure washer model. Consider the following points:
- Check the connection diameter - it should be 3/4 inch.
- Compare the part number (6.465-031.0) with your original part number.
- Ensure the connector is suitable for your type of washer (electric or gasoline).
Possible causes of failure and prevention methods
The connector may fail for several reasons, including:
- Thread wear due to frequent installation and removal.
- Cracking or damage from improper use.
- Corrosion from prolonged contact with water.
To extend the life of the connector, it is recommended to:
- Regularly check the condition of connections and seals.
- Avoid using excessive force when tightening.
- Store the washer in a dry place protected from moisture.
Difficulty of part replacement
Replacing the water outlet connector is a relatively simple task and can be done in a few steps:
- Disconnect the washer from the power and water supply.
- Remove the old connector by carefully unscrewing it.
- Clean the threads of any sealant or dirt residue.
- Install the new connector, ensuring it is securely tightened.
- Reconnect the washer and check for leaks.
The difficulty of replacement can be rated as low, and it does not require special tools. However, if you have any doubts, it is advisable to consult a professional.