|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Ignition cable for Whirlpool oven (481227138493)
The ignition cable is designed to ensure reliable ignition of Whirlpool gas ovens and compatible models. This component plays a key role in the safe and efficient operation of your appliance, providing stable flame ignition during use.
Specifications
| Part number | 481227138493 |
|---|---|
| Type | Ignition cable |
| Material | Insulation material, conductors |
Compatible models
The ignition cable is compatible with a range of models, including:
- Ikea HOB G24 S
- Ikea HOB G25 S
- Ikea HOB G26 S
- Whirlpool AKM 519 IX
- Whirlpool AKM 526/AE
- Whirlpool AKM 526/IR
- Whirlpool AKM 528/JA
- Whirlpool AKM 517/IR
- Whirlpool AKM 523/IX/01
- Whirlpool AKM 519/NB
- HB G24 S 001.234.78
- HB G20 S 901.234.74
- Whirlpool AKM 519/WH
- HB G23 S 201.234.77
- Whirlpool AKM524/WH
- HB G21 S 601.234.75
- HB G26 S 601.234.80
- HB G22 S 401.234.76
- Whirlpool AKM 526/NA
- Whirlpool AKM 524/IX
- Whirlpool AKM 528/NA
- Whirlpool AKM 526/JA
- HB G25 S 801.234.79
- Whirlpool AKM 517/NA/C
- Whirlpool AKM 518/NA/C
- Whirlpool AKM524/IX/01
- Whirlpool AKM 526/NA/C
- Whirlpool AKM 525/IX
- Whirlpool AKM 514 IX/01
How to choose the right part
When selecting an ignition cable, pay attention to the following points:
- Compatibility: Ensure that the part number matches your oven model.
- Condition: Check for any visible damage on the cable, such as cracks or burnt areas.
- Cable length: Make sure the length of the cable is suitable for your appliance.
Causes of ignition cable failure
Common causes of ignition cable failure include:
- Wear of the insulation material due to high temperatures.
- Mechanical damage during installation or operation.
- Short circuits caused by moisture or contaminants.
Recommendations for preventing failures
To avoid ignition cable failures, follow these recommendations:
- Regularly check the condition of the cable and replace it at the first signs of wear.
- Avoid moisture exposure to the cable.
- Follow the operating instructions for your oven.
Replacing the ignition cable: step-by-step instructions
Replacing the ignition cable can be done by yourself. Here’s a step-by-step guide:
- Disconnect the oven from the power supply and gas supply.
- Remove the front panel if necessary to access the cable.
- Disconnect the old cable from its mounts and contacts.
- Install the new cable in place, ensuring proper connections.
- Secure the cable and reinstall the front panel.
- Reconnect the oven to the power supply and gas supply.
- Test the new cable by turning on the oven.
Difficulty of replacement
Replacing the ignition cable is rated as medium difficulty. If you lack experience with electrical and gas appliances, it is recommended to consult a professional.