|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Five-way fitting for pumps, 80 mm
Description: The five-way fitting for pumps with a diameter of 80 mm is a reliable and durable component designed for use in pumping stations. It ensures a secure connection between various system components, helping to prevent leaks and enhance the efficiency of pump operation. Made from high-quality stamped brass, this fitting guarantees longevity and resistance to high pressures.
Technical specifications:
| Parameter | Value |
|---|---|
| Type | Coupling |
| Maximum pressure | 6 bar |
| Total length | 80 mm |
| Pump outlet | External thread 1" |
| To consumer | Internal thread 1" |
| To accumulator | Internal thread 1" |
| To pressure switch | External thread 1/4" |
| For pressure gauge | Internal thread 1/4" |
| Material | Brass |
| Country of manufacture | China |
| Additional characteristics | Made of stamped brass |
Compatibility:
The five-way fitting is suitable for a wide range of pumping stations, providing a versatile solution for connecting various system components.
How to choose the right part:
- Ensure that the thread sizes (1" and 1/4") match your pumps and other components.
- Check the maximum pressure to avoid damage in case of exceeding it.
- Select the material based on operating conditions. Brass is well-suited for various liquids and temperatures.
Possible causes of failure:
- Thread wear due to frequent disassembly and reassembly.
- Material corrosion from aggressive environments.
- Improper installation leading to misalignment and leaks.
Replacement recommendations:
- Disconnect the pump from the power supply and close all valves.
- Carefully unscrew the old five-way fitting using a wrench.
- Check the threads for damage before installing the new component.
- Install the new five-way fitting, ensuring correct thread orientation.
- Tighten the fitting without over-tightening to avoid damaging the threads.
- Reconnect the pump to the power supply and check the connection for leaks.
Replacement difficulty:
Replacing the five-way fitting can be done independently without professional help. The difficulty level is low, making this task accessible even for novice DIYers.
By following these recommendations, you can select the right five-way fitting and ensure reliable operation of your pumping system.