|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gas connection hose Arti 300 mm
The hose is designed for connecting gas equipment, ensuring reliability and tightness of connections. It is made from high-quality stainless steel, which guarantees durability and resistance to corrosion. The fittings are made from carbon steel with a Ni coating, providing additional protection against wear and aggressive environments.
Main specifications:
- Manufacturer: Arti
- Country of origin: Ukraine
- Working medium: gas
- Application: for boilers, gas water heaters, gas stoves, cylinders, and burners
- Length: 300 mm
- Internal thread: 3/4" x 3/4"
- Working pressure: 7 bar
- Hose material: stainless steel
- Fitting material: carbon steel with Ni coating
- Temperature range: from -50 °C to +130 °C
Application:
This hose is ideal for connecting gas equipment, including gas boilers, heaters, stoves, cylinders, and burners. It provides a reliable connection in both residential and industrial operating conditions, withstanding significant pressure and temperature fluctuations.
Compatibility:
The hose is suitable for equipment with threaded connections of 3/4" x 3/4". Before installation, it is recommended to ensure that the hose parameters match the requirements of the connected equipment. To avoid errors, always check the technical specifications of the device you are going to connect the hose to.
How to choose the right part:
When selecting a gas connection hose, pay attention to the following points:
- Thread size: Ensure that the thread matches the specifications of your equipment (in this case, 3/4").
- Hose length: Choose the length based on the distance between the gas equipment and the gas source.
- Material: Stainless steel is preferred due to its corrosion resistance.
- Working parameters: Check that the working pressure and temperature range meet your operating conditions.
Causes of failure:
- Mechanical damage during installation or operation.
- Exceeding allowable pressure or temperature parameters.
- Installation errors or mismatch of equipment specifications.
Replacement recommendations:
- Turn off the gas: Before starting work, be sure to turn off the gas supply.
- Remove the old hose: Use the appropriate tool to unscrew the fittings.
- Clean the threaded connections: Ensure that the threads are clean and free from contaminants.
- Install the new hose: Screw in the hose, ensuring that the thread is not damaged.
- Check for leaks: After installation, turn on the gas and check the connections for leaks.
Difficulty assessment for replacement:
Replacing the gas hose has a low level of difficulty and can be done independently with basic tool skills. However, if you are unsure of your abilities, it is recommended to consult a qualified specialist.
By following these recommendations, you can ensure the reliability and safety of your gas equipment operation.