|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gas connection hose 2000 mm
The hose is designed for connecting gas equipment, ensuring a tight and reliable connection. Made of stainless steel, it guarantees durability and resistance to corrosion. The fittings are made of carbon steel with a Ni coating, which enhances their protection against wear and aggressive environments.
Main specifications:
- Diameter: 12 mm (inner)
- Connection type: nut-nut
- Connection size: 3/4" x 3/4"
- Length: 2000 mm
- Hose material: stainless steel
- Fitting material: carbon steel with Ni coating
- Maximum pressure: 9 bar
- Temperature range: from -70 °C to +130 °C
Application:
The hose is used for connecting gas equipment, including gas boilers, stoves, cylinders, and burners. It ensures reliable connections even in extreme operating conditions, withstanding significant pressure and temperature fluctuations.
Causes of failure:
- Mechanical damage during installation or operation
- Exceeding allowable pressure or temperature parameters
- Installation errors or mismatch of equipment specifications
Compatibility:
The hose is suitable for equipment with threaded connections of 3/4" x 3/4". Before installation, it is recommended to check the compatibility of the hose parameters with the connected equipment.
How to choose the right part:
When selecting a gas connection hose, pay attention to the following points:
- Connection sizes: Ensure that the connections match your equipment (3/4" x 3/4").
- Material: Stainless steel is preferable due to its high corrosion resistance.
- Maximum pressure: Check that the hose meets the requirements of your gas equipment.
Replacement recommendations:
- Preparation: Disconnect the gas equipment and check for leaks in the old connection.
- Removing the old hose: Unscrew the nuts on both sides using a wrench.
- Installing the new hose: Ensure that the gaskets are in good condition, and carefully connect the new hose, tightening the nuts by hand and then with a wrench.
- Checking: After installation, check the connections for leaks.
Difficulty assessment for replacement:
Replacing the gas connection hose has a medium level of difficulty. A minimal set of tools and carefulness are required for the work. If you lack experience with gas equipment, it is recommended to consult a professional.
Methods to prevent failure:
- Regularly check the condition of the hose and fittings for wear and mechanical damage.
- Do not exceed the maximum pressure and temperature parameters during operation.
- Follow installation guidelines and ensure compatibility of all system components.