|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gas connection hose 250 cm
This hose is designed for connecting gas equipment, ensuring reliability and tightness of connections. Made from stainless steel, it guarantees resistance to corrosion and a long service life. The fittings are made from carbon steel with a Ni coating, protecting them from aggressive influences and enhancing wear resistance.
Main specifications:
- Diameter: 12 mm (inner)
- Connection type: nut to fitting
- Connection size: 1/2" x 1/2"
- Length: 250 cm
- Hose material: stainless steel
- Fitting material: carbon steel with Ni coating
- Maximum pressure: 9 bar
- Temperature range: from -70 °C to +130 °C
Application:
The hose is used for connecting gas equipment in both residential and industrial settings. It ensures reliable connections in systems requiring high tightness and resistance to temperature and pressure fluctuations.
Causes of failure:
- Mechanical damage during installation or operation.
- Exceeding allowable pressure or temperature parameters.
- Incorrect installation or mismatch of equipment specifications.
How to choose the right part:
When selecting a gas connection hose, pay attention to the following aspects:
- Connection sizes: Ensure that the threaded connections match the sizes of your equipment (1/2" x 1/2").
- Material: Prefer stainless steel for durability and corrosion resistance.
- Length: Measure the distance between the equipment and the gas source to choose the appropriate hose length.
Replacement recommendations:
Replacing the gas connection hose does not require special skills, but it is important to follow a few steps:
- Disconnect the gas equipment and close the gas valve.
- Remove the old hose by carefully unscrewing the nuts.
- Check the threaded connections for damage.
- Install the new hose, ensuring the fittings are oriented correctly.
- Tighten the nuts with a wrench, avoiding excessive force.
- Check the connections for leaks by turning on the gas and using a soapy solution.
Difficulty assessment for replacement:
Replacing the hose is of low difficulty. Even a beginner can manage it by following the instructions and exercising caution when working with gas.
Preventing hose issues:
To avoid problems with the hose, follow these recommendations:
- Regularly check the hose for mechanical damage.
- Do not exceed the maximum pressure and temperature parameters.
- Ensure proper installation and use appropriate fittings.
Compatibility:
The hose is suitable for connecting equipment with threaded connections of 1/2" x 1/2". It is recommended to verify the compatibility of the equipment and hose parameters before use.