|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Gear for Zelmer 885 Turbo Brush (0885)
The gear for the Zelmer 885 Turbo Brush (0885) is designed to replace a worn or damaged part in Zelmer vacuum cleaners. This gear transmits rotational force from the motor to the turbo brush, allowing for effective dirt removal from surfaces. With this part, you can restore the performance of your vacuum cleaner.
Technical specifications
| Parameter | Value |
|---|---|
| Compatibility | Zelmer |
| Purpose | For vacuum cleaner |
| Type | Gear |
| Gear wheel diameter | 16.5 mm |
| Overall diameter | 20/21.5 mm |
| Overall length | 17.5 mm |
| Tooth length | 12 mm |
| Number of teeth | 18 |
| Gear fitting | Hole 8x6 mm |
| Material | Plastic |
| Quantity per unit | 1 pc. |
| Country of manufacture | China |
Compatibility with models
- Zelmer ZVCA94QGUA/05 (A2111000.10)
- Zelmer ZVCA94QGUA (A2111000.10)
- Zelmer ZVCA94QG/05 (A2111000.10)
- Zelmer ZVCA94QG (A2111000.10)
- Zelmer ZVCA94QBUA (A2111000.07)
- Zelmer ZVCA94QB/05 (A2111000.07)
- Zelmer ZVCA94QB (A2111000.07)
How to choose the right part
When selecting a gear for the turbo brush, it is important to consider the following points:
- Compatibility with the vacuum cleaner model: ensure that the gear is suitable for your device by checking the model numbers.
- Gear dimensions: check the diameter and length of the gear to ensure it fits perfectly with your vacuum cleaner.
- Material: choose parts made of high-quality plastic for durability and reliability.
Possible causes of failure and prevention methods
The gear may fail for the following reasons:
- Wear: frequent use leads to natural wear of the gear teeth.
- Clogging: debris entering the mechanism can cause jamming and damage to the part.
To prevent wear, it is recommended to regularly clean the turbo brush from dirt and dust, as well as to monitor the proper operation of the vacuum cleaner.
Replacement difficulty
Replacing the gear for the Zelmer 885 turbo brush does not require special skills and can be done independently. Here is a step-by-step guide:
- Unplug the vacuum cleaner from the power outlet.
- Remove the turbo brush from the vacuum cleaner.
- Remove the old gear by carefully extracting it from its fitting.
- Install the new gear, ensuring it fits correctly.
- Reassemble the turbo brush and plug the vacuum cleaner back in.
The difficulty of replacement can be rated as low, making this process accessible for most users.