|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Seal for bread maker 8*20*6.5/8
The seal for the bread maker is an essential component that ensures the device's airtightness, preventing oil and water leaks. Made from high-quality silicone, this seal is designed for use in bread makers and other kitchen appliances where protection against moisture and oil is necessary. This seal has an inner diameter of 8 mm, an outer diameter of 20 mm, and a height of 6.5/8 mm.
Technical specifications
| Parameter | Value |
|---|---|
| Material | Silicone |
| Inner diameter | 8 mm |
| Outer diameter | 20 mm |
| Height | 6.5/8 mm |
How to choose the right product
When selecting a seal for your bread maker, it is important to pay attention to the following points:
- Ensure that the inner and outer diameters of the seal match the dimensions of your device.
- Check the material of the seal. Silicone is the optimal choice for durability and reliability.
- Note the height of the seal; it should be compatible with the design of your bread maker.
Possible causes of failure and prevention methods
The most common reasons for seal failure include:
- Wear due to prolonged use
- Damage from overheating
- Contact with abrasive substances or chemical cleaners
To prevent premature wear of the seal, it is recommended to:
- Regularly check the condition of the seal and replace it at the first signs of wear.
- Avoid overheating the device by following the operating instructions.
- Clean the bread maker from dirt using gentle cleaners, avoiding abrasive substances.
Difficulty of part replacement
Replacing the seal in a bread maker is of moderate difficulty. To perform the replacement, you will need:
- Screwdriver set
- Pliers
- Silicone lubricant (optional)
Recommended replacement procedure:
- Disconnect the bread maker from the power supply and allow it to cool down.
- Remove the device cover, following the instructions for your model.
- Remove the old seal using pliers.
- Clean the installation area from remnants of the old seal.
- Install the new seal, ensuring it is securely in place.
- Reassemble the device in reverse order.
If in doubt, consult a professional for the replacement.