|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Belt for sewing machine, 180XL024, Łucznik 2000, 2001, 781 (rubber) • Length - 457.2 mm (18 inches) • Number of teeth - 90 • Width - 6.1 mm (0.24 inches) • Tooth pitch - 5.08 mm • Belt thickness - 2.25 mm • Tooth height - 1.25 mm
When comparing belt drives, it is worth highlighting the toothed belt separately. Unlike flat belts, toothed belts allow for precise positioning of the drive and effective torque transmission. The advantages of such belts also include:
- Low load on shaft and axle supports
- High efficiency
- Ability to transmit loads at high speeds
Toothed drives differ by:
- Length
- Width
- Tooth shape - semicircular, trapezoidal, rectangular, etc.
- Belt pitch
- Material - rubber, polyurethane
- Cord - aramid, steel, polyester, nylon, fiberglass
- Functionality - single-sided, double-sided
The most common profiles are HTD, STD, HPS, and flat-toothed MXL, XL, L, H, XH, XXH, T5, T10. When selecting a toothed belt to replace an old, worn-out one, refer to compatibility tables with pulleys or the markings on the defective belt.
Condition: New
Compatibility: Łucznik
Purpose: For sewing machine
Type: Belt
Profile: 180XL024
Length: 457.2 mm (18 inches)
Number of teeth: 90
Width: 6.1 mm (0.24 inches)
Pitch: 5.08 mm
Belt thickness: 2.25 mm
Tooth height: 1.25 mm
Material: Rubber
Quantity: 1 piece
Country of manufacture: Poland
Features: For driving Polish-made sewing machines
Models: Łucznik series 2000, Łucznik series 2001, Łucznik series 2002, Łucznik series 2003, Łucznik series 781, Łucznik series 783, Łucznik series 784
```