|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Start relay for Atlant refrigerator
The start relay for Atlant refrigerators is an important component responsible for starting the compressor. This device ensures reliable and safe activation of refrigeration equipment, contributing to its efficient operation. With a working current of 1.5A and a starting current of 11A, this relay is designed for refrigerators with a power rating of up to 278W.
Technical specifications
| Parameter | Value |
|---|---|
| Working current | 1.5A |
| Starting current | 11A |
| Maximum power | 278W |
| Compatibility | Atlant refrigerators (model NH 13) |
How to choose the right start relay
When selecting a start relay for your refrigerator, it is important to pay attention to the following parameters:
- Working current: Ensure that the chosen relay matches the working current of your refrigerator.
- Starting current: Check that the starting current of the relay meets the requirements of your compressor.
- Compatibility: Make sure the relay is compatible with your Atlant refrigerator model.
Causes of failure and prevention methods
The main causes of start relay failure may include:
- Overloading the circuit due to high starting current.
- Lack of regular maintenance of the refrigerator.
- Improper use of the device (e.g., frequent on and off cycles).
To prevent relay wear, it is recommended to:
- Regularly check the condition of the refrigerator and perform maintenance.
- Avoid overloading the refrigerator and minimize frequent disconnections.
Difficulty of replacing the start relay
Replacing the start relay for Atlant refrigerators can be done independently. The replacement process includes the following steps:
- Disconnect the refrigerator from the power supply.
- Remove the cover to access the internal components.
- Disconnect the old relay.
- Install the new relay, following the connection polarity.
- Close the cover and reconnect the refrigerator to the power supply.
The difficulty level of the replacement can be rated as medium. It is recommended to have tools on hand and follow safety instructions when working with electrical components.