|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
EGO single-zone power regulator (50.87021.000) - 230V 13A
EGO power regulator (model 50.87021.000) is designed to control the temperature in various home and commercial kitchen appliances. It provides reliable temperature regulation in the range of 52 to 308 °C, making it ideal for use in electric stoves, ovens, and other heating devices. This regulator is compatible with many models from different brands and is a substitute for models 50.57021.010 and 481927328279.
Technical specifications
| Parameter | Value |
|---|---|
| Load | 13 A |
| Voltage | 230 V |
| Adjustable temperature range | 52-308 °C |
| Shaft length | 23 mm |
| Max. temperature | 125 °C |
| Number of contacts | 8 |
Compatibility with models
The EGO power regulator (50.87021.000) is compatible with models from the following brands:
- ALPENINOX
- AMATIS
- AMBACH
- ANGELO PO
- BARON
- BARTSCHER
- BERTO'S
- DIHR
- FOINOX
- SMEG
- WIRLPOOL
- and many others.
How to choose the right product
When selecting a power regulator, it is important to consider the following points:
- Compatibility: Ensure that the model of the regulator matches your device. Pay attention to the part numbers of substitutes.
- Technical specifications: Make sure the regulator supports the required load and operating voltage.
- Shaft length: Check the shaft length to avoid installation issues.
Possible causes of failure and prevention methods
Power regulators can fail for the following reasons:
- Overheating due to prolonged operation at maximum temperatures.
- Mechanical damage from improper installation or use.
- Contact wear over time.
Prevention methods: Use the regulator according to its technical specifications, avoid overheating, and periodically check its condition.
Difficulty of replacement
Replacing the EGO power regulator (50.87021.000) is of moderate difficulty. To replace it, follow these steps:
- Disconnect the device from the power supply.
- Remove the control panel to access the regulator.
- Disconnect the old regulator, noting the wire positions.
- Install the new regulator, following the same wire connections.
- Reassemble the control panel and reconnect the device to the power supply.
If you have basic electronics knowledge and tool skills, the replacement can be done independently. Otherwise, it is recommended to consult a professional.