|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Door handle (hatch) spring for Zanussi washing machine (50294504001)
Description: The door handle (hatch) spring for Zanussi washing machines is a critical component that ensures reliable closing and opening of the washing machine door. This spring prevents accidental opening of the door during washing, enhancing the safety of the appliance. An original part guarantees high quality and full compatibility with your washing machine model, ensuring long-term operation.
Technical specifications:
| Part number | 50294504001 |
|---|---|
| Part type | Door handle spring |
| Material | Steel alloys |
| Color | Gray |
Compatibility:
This spring is suitable for the following Zanussi washing machine models:
| Model |
|---|
| Zanussi ADV107 |
| ZFV1006 |
| ZFV605 |
| ZFV615 |
| ZFV805 |
| ZFV815 |
| ZFV826 |
| ZVF626 |
| ZWF1105W |
| ZWF1105W1 |
| ZWF1106W |
| ZWF145W |
| ZWF155W |
| ZWF164W |
| ZWF165W |
| ZWF185W |
| ZWF185W1 |
| ZWF185W2 |
| ZWF2105W |
| ZWF2105W2 |
| ZWF255W |
| ZWF265W |
| ZWF285W |
| ZWG1860W |
| ZWG1861W |
| ZWG1862W |
| ZWG1863W |
| ZWG2105W |
| ZWG2850W |
| ZWG2851W |
| ZWG2852W |
| ZWG2853W |
| ZWG285W |
| ZWS165W |
| ZWS185W |
| ZWS2105W |
| ZWS2125W |
| ZWF50600WM |
| ZWF60810WV |
| ZWF71020WV |
| ZWO1106W |
| ZWO2106W |
| ZWO2107W |
| ZWO286W |
| ZWS1106W |
| ZWS1126W |
| ZWS186W |
| ZWS2106W |
| ZWS2107W |
| ZWS2127W |
| ZWS286W |
| ZWG1106W |
| ZWG186W |
| ZWG2105WS |
| ZWG2106W |
| ZWG2107W |
| ZWG2127W |
| ZWG286W |
Important: Before purchasing, ensure the part is compatible with your washing machine model to avoid unnecessary returns and additional costs.
How to choose the right product:
When selecting a door handle spring, pay attention to the following points:
- Ensure the part number matches yours.
- Check compatibility with the washing machine model specified in the documentation.
- Review the material and color of the part to avoid visual discrepancies.
Possible causes of failure and prevention methods:
The spring may fail for the following reasons:
- Wear due to frequent use.
- Corrosion caused by exposure to water and detergents.
- Mechanical damage when closing the door.
To prevent premature wear of the spring, it is recommended to:
- Avoid abrupt movements when closing the door.
- Regularly clean the area around the door from moisture and dirt.
Difficulty of part replacement:
Replacing the door handle spring is a moderately difficult task and can be done independently with basic tools. Recommended steps:
- Disconnect the washing machine from the power supply.
- Remove the door by unscrewing the fasteners.
- Remove the old spring and install the new one.
- Reattach the door and check its operation.
If done correctly, the replacement should take no more than 30 minutes. If you are unsure of your abilities, it is better to consult a professional.