|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Hot water tap spring (pair) for Philips Saeco coffee makers (126765317)
General description:
The original hot water tap spring for Philips Saeco coffee makers is designed for the reliable operation of your device. This spring ensures the proper opening and closing of the tap, which is critical for the stable functioning of the coffee maker. Made from stainless steel, it guarantees durability and resistance to corrosion. The length of the spring is 21 mm, and the diameter is 4 mm.
Technical specifications and compatibility
| Specification | Value |
|---|---|
| Length | 21 mm |
| Diameter | 4 mm |
| Material | Stainless steel |
| Alternative number | 996530011633 |
Compatible models:
- Philips Saeco SUP021YE
- Philips Saeco SUP021YR
- Philips Saeco SUP015
- Philips Saeco RI9913/00
- Philips Saeco RI8172/00
- Philips Saeco SUP012R
- Philips Saeco SUP018C
- Philips Saeco RI9737/00
- Philips Saeco RI9737/20
- Philips Saeco RI9737/21
- Philips Saeco SUP018CDR
- Philips Saeco SUP018MDR
- Philips Saeco SUP025PYR
- Philips Saeco SUP021YTDR
- Philips Saeco SUP021YADR
- Philips Saeco RI8172/52
- Philips Saeco RI9737/97
- Philips Saeco RI9913/47
- Philips Saeco RI9913/97
- Philips Saeco RI9748/46
- Philips Saeco 03510US77G
- Philips Saeco SUP018CR
How to choose the right product
When selecting a spring for your coffee maker, pay attention to the following points:
- Ensure that the length and diameter of the spring match the specifications of your coffee maker model.
- Check compatibility with your device model using the list of compatible models.
Possible causes of malfunction and prevention methods
The hot water tap spring may fail for several reasons:
- Wear due to prolonged use: regular inspection and replacement can prevent breakdowns.
- Corrosion: using stainless steel springs can significantly extend their lifespan.
- Damage from improper use: avoid abrupt movements when using the tap.
Difficulty of part replacement
Replacing the hot water tap spring in a Philips Saeco coffee maker requires basic knowledge of the device's construction. The process can be done independently by following these steps:
1. Disconnect the coffee maker from the power supply.
2. Disassemble the casing to access the tap.
3. Remove the old spring.
4. Install the new spring in place of the old one.
5. Reassemble the coffee maker casing and reconnect it to the power supply.
The difficulty of replacement can be rated as low, allowing most users to perform this procedure independently without the need for professional assistance.