|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Heating element gasket for boiler X RF D=45 mm 025524053000 (180715)
Description: The heating element gasket for boiler X RF is designed to seal the connections between the heating element and the flange, ensuring reliable system operation. With a diameter of 45 mm and a square profile, this sealing ring is suitable for RCF and RCA heating elements with a clamping flange diameter of 48 mm. The gasket is installed together with a metal oval flange and an additional ABS gasket - 66110.
Technical specifications:
| Characteristic | Value |
|---|---|
| Diameter | 45 mm |
| Profile | Square |
| Compatibility | RCF, RCA heating elements with a 48 mm clamping flange |
Tips for choosing the part:
- Ensure that the diameter of the gasket matches the specifications of your heating element.
- Pay attention to the profile of the gasket: a square profile provides better sealing.
- Check that the gasket is compatible with your flange and other components being used.
- When purchasing, compare the part with the original gasket to ensure the correct choice.
Possible causes of failure:
- Wear of the gasket material due to high temperatures.
- Improper installation, which can lead to damage.
- Corrosion of the flange or heating element, which can damage the seal.
Methods to prevent failures:
- Regularly check the condition of the gasket and replace it if any damage is found.
- Use the correct tools for installation to avoid damage.
- Adhere to recommended temperatures and operating conditions.
Replacement recommendations:
- Disconnect power and water to the boiler before starting work.
- Remove the old gasket and thoroughly clean the flange surface.
- Ensure that the new gasket matches the size and profile.
- Install the gasket in place, pressing it evenly around the perimeter.
- Install the metal oval flange and secure it according to the manufacturer's instructions.
- Check the tightness of the connections and reconnect the boiler to power and water.
Replacement difficulty:
Replacing the heating element gasket for the boiler is rated as moderate in difficulty. A basic set of tools and some experience in appliance repair are required to perform the work.